Jump to content
SAU Community

Recommended Posts

*sigh* ok, I'll save that for the next SAUWA Paintball day :P

Got the bottom end up to the workshop this arvo, will get up there next on Saturday.

Missed the courier that came to drop off my new radiator :(

Got confirmation clutch left yesterday :banana:

  • Replies 804
  • Created
  • Last Reply

Top Posters In This Topic

32 is booked for the painters, finally some slow progress. She's getting this colour http://imageshack.us/photo/my-images/59/2005yzfr1lavaredjpg.jpg/sr=1

Edited by turboedsloth

Not for ages i don't think. Hopefully end of the year. It's an on going project thats been 2yrs so far. Slowly buying engine parts and suspension goodies atm. Nissan Japan just finished remaking my door seals which took 3 months to get

Nice colour Corey!

Pulled the turbo off the wagon yesterday arvo.. looks like a pretty big highflow (it's unknown and came with the car), there's only a couple of mm of snout left.. keen to see how it goes on the 3L :D

the only thing i dont like about the 4 doors (this goes for 32/3/4) is the tail lights. If it was easy to put the coupe ones in i would go for it. I understand that Nissan wanted them to be different but they just look like @ss to me.

Got my clutch yesterday :thumbsup:

Sent turbo off for inspection and possible rebuild (leaking a bit of oil), on the plus side I may have found who built this unknown highflow!

Handbrake shoes being collected today and hopefully injectors.

Went to wire in my resistor box and new injector +ve's and was left scratching my head over WHY the standard loom is laid out the way it is.. (injs 1,2,3 on main part of loom, injs 4,5,6 on sub loom that bends back on itself) seems rather pointless so I've traced back the injector earths and the common feed all the way back to near where the igniter plugs are. Not running the IACV so can actually piss off the whole front sub-harness.

Going to Jaycar today to grab some more wire and will run all the injectors earths through the new loom I've made and my mate is bringing round a nice sealed plug so that the whole injector loom will be removable.

I think it's purely for spatial reasons, it's pretty cluttered under the standard plenum what with TPS plugs and IACV plugs in the same area. The only thing that is subject to noise is the CAS but that runs in its' own heavily shielded cable.

My way will be a lot neater with the loom hidden under the plenum.

I'm already excited for it :)

Imports and bbq.

2 great things.

Going to ditch the cable ties this weekend hopefully and secure the front lip properly.

On another note. Welding internal gates (I think that's what it's called) is it a bad thing?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
    • Run it in open loop for now, and drop the frequency down. This lowers the resolution and requires more duty cycle to do anything, however good to troubleshoot.
×
×
  • Create New...