Jump to content
SAU Community

Best/cheapest Insurance For An R33 Series 2 Gts-T

SDUCTV33

By SDUCTV33,
in South Australia

 Share

Recommended Posts

Damo_R34 Grand Master

Damo_R34

Posted
Posted

dont bother putting it into your dads name, you will need to be listed as a percentage driver of some sort, and the premium will always reflect the youngest driver.

Best and cheapest are two things you will soon learn don't go together in the same sentence when owning a skyline.

FYI, try SGIC, Just Cars and Shannons.

Evil34 Experienced

Evil34

Posted
Posted

Have you ever had any insurance before even thidr party?

If so, i would go with just cars as they recognise this and will give you the equivalent full comp insurance.

you also have young and cool, vigil and famous car insurance.

Pays just to ring around as you need an insurance history at some stage in your life and it is better to start now rather than later.

Make sure you get an insurance approved alarm and a club lock for the steering wheel the more deterrants the better.

Damo_R34 Grand Master

Damo_R34

Posted
Posted

Yea, unless you are over 25 and no accident history for 3-5years Shannon's probably won't insure you.

Just saying.

I have proof they insure under 25's.

Krishy - R33 GTS-t, no accident history. Insured by Shannons for a couple of years now

Me - R34 GT-t, no claim history or crash history, Shannons wont insure me

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...