Jump to content
SAU Community

Recommended Posts

Ok I just got word back from my ‘mole’ inside DoTaRS that there are some MAJOR changes planned for SEVS regarding vehicle emissions, and what’s worse, some of them will be retrospective and will apply to cars already complied!

1) Like the NZ import scheme, SEVS eligibility will soon be limited to cars that meet the Japanese ‘TA’ emissions scheme or later if they’re ex-Japan (that means no cars prior to about 2001 will be eligible for import). For the Skyline range, this will rule out all R32s, all R33s and virtually all R34s (did any R34s meet TA regs or were they all GF?), but V35 and V36 will still be ok. Evos prior to Evo 7 will be out. Supras will all be out. JZX100 Chasers will be canned, but JZX110s will be ok. US-built vehicles are not affected because their emissions regs are stricter than ours anyway.

2) Cars ALREADY imported under SEVS will be tracked down via NEVDIS (the national database for vehicle identification) and owners contacted. The plan is to make owners submit their vehicles for annual emissions inspections to ensure that their vehicles meet the regulations they were complied under. Cars complied under the old scheme prior to SEVS will be exempt, as will cars imported under the pre-’89 rule.

3) The plan is to move SEVS more in the green-car direction, so they will soon allow hybrid models of cars already sold here in Australia to be imported – for example, the Tarago is sold in Japan as the Estima Hybrid, that will be allowed for import.

Well there goes my business, unless I move to Nimbin and use the tree huggers as my new target market... :down:

Edited by Iron Chef
Link to comment
https://www.sau.com.au/forums/topic/359421-changes-to-sevs-in-the-pipeline/
Share on other sites

any ideas on timing for this chef? i.e. can we go import crazy now on pre 2001 cars until this is made official?

better be an april fools f**ker

If its true tho Rhys, will it be worth owning an import that you can modify only basically so it passes emissions once a year?

Well it is actually closer to the truth then an april fools joke, many submissions (LINK) have been put forward for a few years now including as below from the Australian Automobile Association about 3 year old max cars to be imported.

Then you have the current submission LINK of the NSW MTA (image below) that if you are not a dealer you should only be allowed to import one car a year (it was one car every 2 years).

Its coming that is guaranteed, just look at the changes to Pre 1989 model cars and Personal Imports.

post-5805-0-48794900-1301627171_thumb.jpg

post-5805-0-74203000-1301627846_thumb.jpg

For the record, PRIMO passed on a copy-and-paste of my info to my agent in Japan, and from there it went around the auctions like wildfire, till I got a panicked call from another agent I use in Tokyo asking what the hell was going on! Evidently April Fools isn't a big thing in Japan, making them all ripe for the picking haha

For the record, PRIMO passed on a copy-and-paste of my info to my agent in Japan, and from there it went around the auctions like wildfire, till I got a panicked call from another agent I use in Tokyo asking what the hell was going on! Evidently April Fools isn't a big thing in Japan, making them all ripe for the picking haha

sounds like you got a VERY STRONG bite out of it.

mind you ADR 79/02 is going to shake a few people. anything after 2008 ( I *think*) has to pass that one to gain entry.

as for the emmisions gag - like that one. reminded me of the drive by emmissions tests in california.

I think DoTaRS are taking a closer look at it Chris, particularly as Japan has changed its testing procedures for emissions in recent times to be more like what they do here.

The biggest issue is the cost of the test itself for late model cars, I've heard figures of $30-40K bandied about, which makes it bloody hard to recoup those costs without charging a crazy amount for compliance. Ideally, we want DoTaRS to recognise the Japanese testing procedures as being valid here, once that's done, it will be a matter of providing the Japanese emissions paperwork to pass, same as they do with cars from the US now.

Edited by Iron Chef

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...