Jump to content
SAU Community

Recommended Posts

hey guys my car has just come back from tuners after having a microtech wired into it. however my taillights dont work. aparently they replaced my fuse box but i dunno. i cant drive the car anywhere because i have done a engine conversion and dont want a yellow. does anyone know a auto sparky or someone that could help me im not confident when it comes to wiring

Cant take it back to them to fix it?? i doubt they replaced a fuse box for ecu install? have you checked fuses yourself?

im coming up late next week for a course and will be driving my field service ute up. not making any promises as my granddad is sick and unsure what time it finishes each day. let me know if you can wait that long and ill try keep you posted

i have worked out what the problem is. the r33 fuse box is on the drivers side so when they wired in the rb25 loom they didnt hook up the tail lights relays etc to the passenger side. so i have all the fuses and relays for the tailights on the drivers side(part of the r33 loom) how to i go by changing this back to the vl fuse box

yeah sounds great i have no idea when it comes to wiring problem is im not free on sat im at work until 1 then i have a work function until 730 so sunday would have to be the best day pm me and let me know and ill send you my address

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...