Jump to content
SAU Community

Oil Filter Sandwich Plate

luvpsi

By luvpsi,
in Engines & Forced Induction

 Share

Recommended Posts

luvpsi Mentor

luvpsi

Posted
Posted

hey guys i dont know if this is in the correct section r31 nismoid feel free to move this if in wrong section bought a oil sandwich plate to fit my oil pressure sender off ebay however it does nothing but piss out oil no matter how tight i do it up. does anyone know where to get one that is not a china made one i dont want this problem again.

Link to comment
https://www.sau.com.au/forums/topic/360117-oil-filter-sandwich-plate/
Share on other sites
The Dan Grand Master

The Dan

Posted
Posted

Would help if we knew what sandwich plate you bought and what oil pressure sender it is.

My suggestion, if the thread appears to be ok, use loctite thread locker when you screw it in to seal the thread. But it will all depend on what parts are being used.

luvpsi Mentor

luvpsi

Posted
  • Author
Posted

so im not making another thread for a similar problem my tuner just told me there is a small dent in the sump and it could cause problems what do you guys think. im only running a standard rb25det with 10psi and a microtech ecu. i dont know if he is trying to take me for a ride but it is hard because i can not get down there to look at it myself due to my work hours. what are your thoughts

luvpsi Mentor

luvpsi

Posted
  • Author
Posted

lol small dent... if you saw the sump on one of my track car's you'd cringe... they can take a fair wack before hitting the pick up.

is the sender the correct thread for the sandwich plate? what brand? post pics!

thing is my tuner only wants to do a basic tune until i fix the dent in the sump because he reckons its going to cause problems however when i put the motor in i checked the sump and tiny dents didnt bother me i have seen some big dents in my time also being a engine rebuilder i just think he is trying to take me for a ride.

and with the sandwich plate its the main center stalk that its leaking around aparently not sure ill have to have a good look myself i think. i reckon maybe it was just a pinched oring or something

zoidbergmerc Mentor

zoidbergmerc

Posted
Posted

An "engine rebuilder" having trouble fitting a oil filter sandwich plate... hmmm....

I wouldn't use one personally, esp not an ebay one, heard too many horror stories about them failing and people dying.

JonnoHR31 Grand Master

JonnoHR31

Posted
Posted

the lowest part of my sump is dented in about 30-40mm on the whole bottom section, didnt even bother hitting it out when i had the sump off and motor apart, its fine. unless its blocking/breaking the pickup (you'd know by now as you'd have pressure problems) its fine

luvpsi Mentor

luvpsi

Posted
  • Author
Posted

thing is im not looking at drifting or tracking it and im only looking at running 300rwkw down the track. and its only going to really be street and maybe a bit of strip use so i cant justify spending that money on a sump when i got a spare sump laying around. also the tuner just tuned my car and has had no oil pressure issues so i dont even know if its worth changing it but to be on the safe side i might change it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • joshuaho96
      UniClutch

      By joshuaho96 · Posted

      All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Piggaz
      UniClutch

      By Piggaz · Posted

      Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...