Jump to content
SAU Community

Recommended Posts

looking at upgrading my injecotrs and fuel pump b4 i get a tune and needing advice

in tank vs external which better? walbro vs bosch? looking for something that will fit in relatively easy without paying 3+ times the price to get a nismo one that will drop straight in.

what size injectors needed?

looking for 300awkw max but prob for better fuel ecomony and reliability will go closer to 250awkw.

300rwkw you might find will be OK with stock injectors. Some cars are, some aren't so as Jez said - just go with a fuel pump for now mate.

If you need them, get them. Otherwise you can tune to 280/290rwkw and save $700-$900 (purchase/fitting).

What turbos do you have? 300rwkw means non factory so you could probably make more if you did get injectors, you will need AFM's though.

not really keen on spending $600 on nismo pump which is more than 3 times price of bosch or walbro pump just coz its bit easier to install. from sounds of it unless i find a cheap set of injectors stick to what i got coz from what i can see like $600 sard 550cc injectors though the price to go to 1000cc injectors isnt much more.

so for fuel pump in tank vs external which better? walbro vs bosch? looking for something that will fit in relatively easy without paying 3+ times the price to get a nismo one that will drop straight in.

i got the N1 turbos, i tired searching several different topics nothing seems to come up but i get this alot guessing im just not using right words.

I have tuned a gtr 312kw stock injectors but a fuel reg.

250 kw is nothing for stock inj. Just get a fuel pump

What base pressure and afr bro?

But yea 250awkw is poossible with stock 444cc inj, even a little more......I'm doin roughly that now with them at 88% duty with 11.0 afrs,,,,and i'm sure your tuner wouldnt go that rich

Oooh ....an a walbro pump too....not in a gtr tho so i'm not sure about fitment

What base pressure and afr bro?

But yea 250awkw is poossible with stock 444cc inj, even a little more......I'm doin roughly that now with them at 88% duty with 11.0 afrs,,,,and i'm sure your tuner wouldnt go that rich

Oooh ....an a walbro pump too....not in a gtr tho so i'm not sure about fitment

I tuned it at 11.5 afr. I never set the base pressure myself so i can answer that one sorry.

Inj hit 105%

There is a new fuel pump, just released not long ago. It flows nearly 350lph at 45psi. 290lph @60psi all at 13.5v.

Basically it flows just over 30% more then a failbro 255, denso etc.@ 13.5v. As another comparison

the walbro and denso need 16.5v to run close to this pump at its 13.5v flow on 0.7 SG.

Nismo quotes 276lph @ 3 Bar pressure, no SG or voltage quoted

The only downside I can see is that it will probably surge on under 1/4 tank on a bnr32- more of a design prob of the

tank then pump.

Its a 100% drop in, in tank pump and the best part is, cost is about $250

I will be getting mine in a few days and post findings

What brand? Anyone needing more than 255LPH is going to be aiming for serious power and won't care about a couple hundred $$ saved, and will probably NOT skimp on it given how much was spent on the engine.

But, see how it goes :)

There is a new fuel pump, just released not long ago. It flows nearly 350lph at 45psi. 290lph @60psi all at 13.5v.

Basically it flows just over 30% more then a failbro 255, denso etc.@ 13.5v. As another comparison

the walbro and denso need 16.5v to run close to this pump at its 13.5v flow on 0.7 SG.

Nismo quotes 276lph @ 3 Bar pressure, no SG or voltage quoted

The only downside I can see is that it will probably surge on under 1/4 tank on a bnr32- more of a design prob of the

tank then pump.

Its a 100% drop in, in tank pump and the best part is, cost is about $250

I will be getting mine in a few days and post findings

would like more info on this pump and also you findings

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...