Jump to content
SAU Community

Recommended Posts

2 weeks ago i purchased my 350z anniversary wheels , although they were just a little to plain for me in the standard alloy colour . so today i thought id pull out the spray gun and give them a more stealthy aggressive look. the paint i used was the factory black r34 GV1 from memory .much to my suprise they came out better then i expected , totally give the car a different look.

for anybody at home looking to do something similar, the process was pretty simple .

1. rough up existing paint with 400 gritt

2. clean with thinners

3. spray a dust coat with the base paint.followed by 3 firm coats

4.2-3 coats of clear

5. maybe even a bit of a cut and polish depending how fussy you are

overall the end result was worth the time , took about 1 hr per wheel , off and back on again. ill throw a final pick up tomorrow , bit too dark by the time i got inside :P

cheers , and comments or questions hit me up

post-32277-0-17504400-1302597436_thumb.jpg

post-32277-0-78745000-1302597656_thumb.jpg

post-32277-0-26764700-1302597665_thumb.jpg

post-32277-0-16068600-1302597676_thumb.jpg

post-32277-0-32547600-1302597777_thumb.jpg

Edited by sky017
Link to comment
https://www.sau.com.au/forums/topic/360681-bit-of-diy-painting-today/
Share on other sites

Arthur T3 - it was a pretty sunny day yesteday when i sprayed them, being acrylic it dries pretty quick too. but what i did was after id spray the clear , i gave it 15 . then rolled it back to the car , carefully put it back on . put the bolts on carefully , pretty easy considering they are a pretty wide hole . then just left them over night to dry completely . saves a bit of time so i can get the next wheel, off to prep. i was keen to get them done before the sun went down :P cheers

aahh of course, it was sunny..

i live in melbourne, we dont really get that here .

Ive been painting in the shed with the heater goin and still having trouble drying, ive resorted to doin a coat a day during the week and assemmbling the next weekend :(

aahh of course, it was sunny..

i live in melbourne, we dont really get that here .

Ive been painting in the shed with the heater goin and still having trouble drying, ive resorted to doin a coat a day during the week and assemmbling the next weekend :(

hehe poor you by the sounds of it. definitly hate drying process, i try to be a perfectionist at times , but damn sometimes i just want it done and back on the car, i sprayed my rear bar on a sunny day ,then bang raining! heres me out in the garage still spraying lol. only crap thing is it goes milky in the cold , never the less all goes away when you cut it bck :P

thanks for the positives guys , much appreciated

i do a few colour coats and a couple of clear, but havent cut it, could be why my finish isnt as good,what do u use?

Think i have a bottle of mequiers fine cut would that do it?

i must say it requires a fair bit of work in regards to cutting to get that high gloss finish . usually rub back from 1500 - 2000, then use a cutting compound. iv used this septone stuff i purchased from the car paint place, followed by a polish compound ,then some other detailing polish. all depends what your doing , but thats my process for body work , seams to work for me. by the way in saying that , its a must you use a power dril or a variable speed grinder with buffing wheel / foam pad attatched to really get that gloss to shine , using some cheap buffing wheel from kmart wont be sufficient enough.

<--- see my profile pic

did this on the old r33 years ago.

same technique, wet sand, but i also used some putty to smooth out the gutter rash etc so took me a full day with all the waiting and drying.

these wheels do look nice though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi everyone, I'm about to complete my first single turbo conversion on my R32 GTR and I thought I would post the step by steps that I will be following. I will list the parts I have / the parts I will be buying. I will be redoing this guide after I have completed the conversion. Parts list: - 3576 turbo 0.82 v-band (coolant and oil)  - v-band top mount turbo manifold - 50mm wastegate - manifold copper gasket - titanium manifold stud kit - turbosmart 3 port boost solenoid - link can lambda kit (wideband) - link ECU - radium 12AN push in valve cover fittings (pair) - hi octane catch can - 3.5inch downpipe - screamer pipe - pipe from turbo to intercooler - intake pipe setup - power steering relocation kit - oil drain block off plate - coolant and oil lines Now onto the step by step guide (please add / correct me if there's anything I missed: 1. remove fluids, twin turbo pipes, pod filters and afm's 2. remove the factory coolant hardlines from the hot side. 3. remove heat shields  4. remove the downpipe 5. remove turbos and manifolds 6. remove factory manifold studs 7. clean whatever mess you have made 8. install power steering relocation kit 9. install new manifold studs 10. install new turbo manifold with gasket 11. install new wastegate with screamer pipe 12. install new turbo  13. install new coolant and oil lines  14. install rear oil drain block off plate 15. stop and appreciate that you now have a single turbo in your GTR 16. wipe away tears of joy and install downpipe 17. install the wideband sensor into downpipe 18.install pipe to connect turbo to intercooler 19 .remove stock boost solenoid  20. install new boost solenoid 21.  install intake setup 22. setup the rest of the can lambda kit with the ecu  23. refill fluids and hope for the best 24. ask forums for help with issues 25. fix issues 26. drive your single turbo swapped r32 GTR into the sunset. Doneeeeeeeeeee. Now I know this isn't detailed at all but I will be doing that when the conversion is done. I will be posting pics and any helpful details i can and ill make sure to fit in as much information as I can. If there's anything I should know before i do this PLEASE let me know. Stay tuned for what's next. Thanks...
    • I have wasted too much time on this, more than I am willing to admit. I hope someone can set the record straight for me.  I want to replace my Nismo (non GT pro, non GT) standard 2 way in my R33 GTST with a 1.5 way... Ideally I want to get an ATS 1.5 way Carbon LSD, but I don't want to reuse my 29 spline 5x1 axle stubs, and new 30 spline 5x1's are impossible to get a hold of ($$$), and I don't want to drop the cash on going to 6x1 stubs and axles ATM. Which leads me to the Nismo GT Pro 38420-RSS15-B5 or RSS20, as they come with new axle stubs meant for the diff, and is "Convertible" from a 2 way or 1.5 way to "Other ways", but that is where I am stuck as the documentation is a bit all over the place.  To sum up what I have found I believe the all the Nismo GT Pro PN's are convertible from 2 way, 1.5 way, and 1 way; but Nismo sells 2 skus (2 & 1.5) so people do not have to disassemble to convert it.  I found this thread on 350z but it left the question unanswered. https://my350z.com/forum/engine-and-drivetrain/620032-nismo-gt-pro-lsd-1-5-vs-2-way-and-torque.html  Essentially the way I think it all works out is like follows...  2 way  1 way  and 1.5 way would be the center pinion shaft in the 1 way block, but with the with the center flipped 180*. So the ramped side of the pinion would face the 1 way gate and act like a ramp.    I can only get my hands on the 2 way in the states, and I am not trying to get stuffed on tariffs by ordering from Japan or anywhere else. I want to confirm that if I get the 2 way I can convert it to the 1.5.     
    • Hi everyone, I have purchased my first GTR and I want to do a single turbo conversion to it. I've been doing as much research as i can and there are a few things that I can find and need to know. I need to run a coolant feed, coolant return, oil feed and oil return for my turbo setup. Here's what I know so far: On the hot side of the rb26 there is coolant feed, oil feed and oil return. Coolant return will be going around the front of the engine to where the thermostat is located. I will need to block off the rear oil return port. I will be running a turbosmart boost solenoid so any of the factory boost stuff wont be needed. Now onto what I don't know: 1. What do I do with the coolant / vacuum hardlines that run around the back of the motor?. 2. What do I block off or loop or move or remove?. I will be running the OEM intake manifold. 3. Is there anything in particular I need to buy for the cold side of the rb26?. I already have the intercooler and pipes sorted. If you have any pictures or information it would be appreciated. Thanks....  
    • The fab work can be as simple as a couple of silicon hoses and clamps to the factory piping. 
    • Just sounds like either way you need to do some fab work to get everything to fit, so why limit yourself at that point? If the GCG high flow option is zero effort in and out swap though I'd probably do that. It's almost certainly lowest risk, lowest cost, etc. The HKS GTIII-RS option that Kapr mentioned is laughably expensive for what it is, they charge the exact same for two turbos on the RB26 so their margins are off the charts on that thing.
×
×
  • Create New...