Jump to content
SAU Community

Rb26 High Mount Single Turbo Kit

Weapon
 Share

Recommended Posts

Weapon Mentor

Weapon

Posted
Posted (edited)

Hi all, time has come to change up my set up as the entire engine package is getting revised including turbo system.

Up for grabs is:

1x GARRETT GT3582R 0.82ex ( Rear Housing HPC Coated Black)

1x Tial 44mm External Wastegate 1bar spring ( Body of Wastegate HPC Coated)

1x ETM (Extreme Turbo Manifolds) Steam Pipe Exhaust Manifold ( HPC Coated Black also)

1x Stainless 3inch Dump and Front Pipe with two O2 sensor ports

1x Complete Oil and Water line Kit to suit (all braid and speedflow)

1x High Polished 4in intake pipe with filter

1x New Nissan RB26 Exhaust Manifold Gasket in packaging still

Please note that the compressor housing is polished aswell . All HPC coating was done by Craved Coatings. Turbo kit has done approximately 15000km. This set up is extremely responsive and the manifold is a wonderful bit of gear.

This is a complete kit, the only thing that will need doing is the hot side pipe. The compressor housing also has an ally elbow welded on already so this is also handled. This kit will suit either R32 or R33 GTR.

Item Located in Townsville QLD 4818. I do apologise for not having any pics, i cannot get them off my iphone onto my shit PC. If genuinely interested please txt me and will be more than happy to forward pics and even video of turbo kit.

Asking $2900 + freight.

Best to email [email protected] or txt me on 0438840407

No time wasters please, this is a good price for a great kit :)

Cheers Marty

Edited by Weapon
Link to comment
https://www.sau.com.au/forums/topic/361002-rb26-high-mount-single-turbo-kit/
Share on other sites
  • 6 months later...
  • 6 months later...
Weapon Mentor

Weapon

Posted
  • Author
Posted

Hey guys sorry to bring through the bad news however this kit has been sold for quite some time.

The kit was exchanged for another kit with a cash difference. That kit has since made way for another kit now on my GTR lol

Thread needs to be closed.

Cheers Marty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...