Jump to content
SAU Community

Recommended Posts

Hey just having a bit of a shed clean up, all parts are located in Devonport, unsure what some stuff is worth so prices are negotiable and can send pictures on request

-pair of 5 x 114.3 20mm wheel spacers, missing one nut - $60

-atmo bov, not sure what brand come with a car and ive never used it - $20

-rb20de fuel pump and fuel level sensor - $45

-r32 gtst door skins, average condition - $30

-rb20 turbo, unsure of condition and ive never used it, got scammed on the net and told it was a low k rb25 turbo paid $300 - $offers?

-air con pump off an r32 rb20, unknown condition, comes with mounting bracket - $20

-r33 gtst engine bay fuse box - $50

-r33 gtst thermo from infront of the ac radiator - $25

-r33 front window squirters, white, comes with some lines - $20

-r33 bonnet release cable, handle - $20

-r33 gtst series 1 rh 1/4 panel indicator - $10

-r33 gtst radiator top support brackets, missing one rubber - $5

-r33 window squirter motors (front and rear), unknown condition - $15

-r33 gtst hicas rear steering rack, unsure of condition - $20

-r33 gtst over flow bottles x 2 - $15 each

-r33 gtst series 1 m-spec front bar, cracked under rh headlight, rh indicator is broken and the little tab where it bolts onto the rh quater is broken, black - $100

-r32 centre console trim that goes beside the cd player, ac control etc and under the dash, chip out of the passengers side - $20

-random old saas steering wheel - $20

contact me by pm or on 0407481699

Link to comment
https://www.sau.com.au/forums/topic/361146-few-parts-for-sale/
Share on other sites

  • 4 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...