Jump to content
SAU Community

Recommended Posts

Hello,

Car is back at home now so time to sell it off.

I would ideally like to sell the car as a whole but am willing to part out certain bits and pieces that are easy enough to deal with.

Car:

1999 R34 GTT Coupe - White

138XXXkms - Dash is gone so not sure on exact kms this is pretty close though

Automatic Trans (shift kitted)

Details: Car was stolen from me a couple of months back. was found partly stripped. no insurance was involved so car has not been written off. pretty much all of the interior is gone including window seals, carpets etc.

Main part of dash still remains along with the steering wheel and auto shifter/handbrake. Airbags not deployed etc.

All panels are still in excellent condition except the drivers door which has damage.

Motor and gearbox were in good condition for age, always serviced used mutol oils. unfortunately motor cannot be shown running due to the parts missing.

Parts missing:

Turbo

Dump

Intake

Coilpacks

Battery

Crossover pipe w/ Bov

Drivers Window

Passenger mirror glass

Headlights

Aftermarket parts still on car:

Greddy front mount intercooler

Greddy type S coilovers

Whiteline Adjustable swaybars (24mm front/20mm rear)

Rear adjustable camber arms

Hicas lock bar

Superpro adjustable castor bushes

Superpro subframe alignment kit

Nistune Ecu - (tuned to 194rwkw by EFI performance)

Walbro Fuel Pump

assorted new bushings

Viper alarm system (remotes stuffed)

Pics:

post-39016-0-07025900-1302952198_thumb.jpg post-39016-0-02256900-1302952225_thumb.jpg post-39016-0-64472500-1302952252_thumb.jpg

post-39016-0-32953100-1302952275_thumb.jpg post-39016-0-56480400-1302952297_thumb.jpg post-39016-0-20692200-1302952326_thumb.jpg

post-39016-0-38331700-1302952355_thumb.jpg post-39016-0-26221300-1302954586_thumb.jpg post-39016-0-38154700-1302954634_thumb.jpg

Price: not too sure to be honest so $4000ono it is. I am open to offers on whole car and parts.

Parts for sale:

Greddy Front mount intercooler -- $200

Greddy type s coilovers -- $1000

Whiteline Adjustable swaybars (24mm front/20mm rear) -- $150/$150

Nistune ECU -- $400

QFM HPX brake pads (front/rear) never used brand new - $120

post-39016-0-69850400-1302952644_thumb.jpg

CES 3" mild steel cat back (magnaflow muffler, twin 3" tips) good cond - $450

post-39016-0-77910200-1302952720_thumb.jpg post-39016-0-35085700-1302952747_thumb.jpg

R34 fibreglass/carbon boot (clear peeling in small corner area) -- $150

post-39016-0-19025100-1302952811_thumb.jpg

R34 Standard airbox and snorkel w/ K&N hiflow panel filter -- $100

post-39016-0-15595300-1302952870_thumb.jpg

R34 Standard Fuel pump with bracket -- $80

post-39016-0-98310600-1302952923_thumb.jpg

BM50 brake master cylinder (i never used, guy i bought it from said it had been rebuilt 10,000kms ago from an r32 gtr i think) -- $100

R34gtt Engine cover -- $50

post-39016-0-52067000-1302953018_thumb.jpg

Rb25det coilpack cover -- $30

R34 boot lining/carpet -- $60

post-39016-0-41705800-1302953100_thumb.jpg

R34 standard plastic front bar with indicators (trimmed to fit FMIC, some scuffs etc) -- $200

R34 JIC Coilovers - unsure on exact model, condition unknown - would suit rebuild -- $350

post-39016-0-86382300-1302953222_thumb.jpg

2x transmission/oil coolers - one is davies craig other is unknown -- $20ea

post-39016-0-61168700-1302953291_thumb.jpg

R34 guard lining -- $40

post-39016-0-00987800-1302953335_thumb.jpg

R34 window washer bottle -- $35

post-39016-0-54133800-1302953383_thumb.jpg

Drift oil catch can -- $20

post-39016-0-81849700-1302953447_thumb.jpg

Greddy Turbo timer (missing a plug from harness, could be wired up easy) - $50

post-39016-0-69082600-1302953505_thumb.jpg

R33 coupe bootlid with spoiler/struts/light (scratches) - $100

post-39016-0-82435600-1302953588_thumb.jpg

R33 front fenders w/ indicators (one cracked) scratches -- $50ea

post-39016-0-91026800-1302953648_thumb.jpg

R34 pink label AFM -- $120

post-39016-0-02541600-1302954374_thumb.jpg

pair of 17" SSR wheels - gold w/tyres - unsure of offset 17" multistud -- $300

post-39016-0-77112700-1302954193_thumb.jpg

Thats about it!

If there is something you are chasing let me know and we may be able to work something out.

all prices are negotiable and postage is a maybe depending on item would prefer pickup - make an offer!

Location: Brisbane Southside

Contact:

Steve - PM or reply

mobile/sms: 0422 850 698

Cheers!

email: stephen.hendicott (at) gmail.com

Link to comment
https://www.sau.com.au/forums/topic/361154-r34-gtt-partoutcomplete-sale/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

want to have a squiz at the car. may know someone that will take it as it sits.

(I have a 32 as you know and do not need another car.)

want to have a squiz at the car. may know someone that will take it as it sits.

(I have a 32 as you know and do not need another car.)

Let me know when you want to come have a look Chris.

Once chris has looked at it guys and I know what's happening there I'll get back to you in regards to pulling bits off. Obviously if someone takes the car they get first dibs on the bits that are still on it.

Cheers

Let me know when you want to come have a look Chris.

Once chris has looked at it guys and I know what's happening there I'll get back to you in regards to pulling bits off. Obviously if someone takes the car they get first dibs on the bits that are still on it.

Cheers

No worries, I have yet to pick the car up yet, but I've been looking for a white wing for it :yes:

Hey mate, sorry to hear about your loss. How would the FMIC go fitting up to a S15? (is it R34 specific or generic?) If its not taken let me know.

Again, sorry about your loss. Feel almost dirty buying things from you under this circumstance.

Don't feel sorry for wanting to buy stuff from me. Let's me get 'some' money back :)

Sorry the fmic is spoken for ATM. Don't think it would fit s15 though without new pipework

Let me know when you want to come have a look Chris.

Once chris has looked at it guys and I know what's happening there I'll get back to you in regards to pulling bits off. Obviously if someone takes the car they get first dibs on the bits that are still on it.

Cheers

strip it!

fellow does nto want to see it in the flesh. says there is too much missing to put it back together.

after to harmonic balance and crankshaft how much

Not parting the engine just yet. I don't have the time for it.

Hicas bar I'll try to get off in the next few days, I'll send you SMS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...