Jump to content
SAU Community

Recommended Posts

Hello,

Car is back at home now so time to sell it off.

I would ideally like to sell the car as a whole but am willing to part out certain bits and pieces that are easy enough to deal with.

Car:

1999 R34 GTT Coupe - White

138XXXkms - Dash is gone so not sure on exact kms this is pretty close though

Automatic Trans (shift kitted)

Details: Car was stolen from me a couple of months back. was found partly stripped. no insurance was involved so car has not been written off. pretty much all of the interior is gone including window seals, carpets etc.

Main part of dash still remains along with the steering wheel and auto shifter/handbrake. Airbags not deployed etc.

All panels are still in excellent condition except the drivers door which has damage.

Motor and gearbox were in good condition for age, always serviced used mutol oils. unfortunately motor cannot be shown running due to the parts missing.

Parts missing:

Turbo

Dump

Intake

Coilpacks

Battery

Crossover pipe w/ Bov

Drivers Window

Passenger mirror glass

Headlights

Aftermarket parts still on car:

Greddy front mount intercooler

Greddy type S coilovers

Whiteline Adjustable swaybars (24mm front/20mm rear)

Rear adjustable camber arms

Hicas lock bar

Superpro adjustable castor bushes

Superpro subframe alignment kit

Nistune Ecu - (tuned to 194rwkw by EFI performance)

Walbro Fuel Pump

assorted new bushings

Viper alarm system (remotes stuffed)

Pics:

post-39016-0-07025900-1302952198_thumb.jpg post-39016-0-02256900-1302952225_thumb.jpg post-39016-0-64472500-1302952252_thumb.jpg

post-39016-0-32953100-1302952275_thumb.jpg post-39016-0-56480400-1302952297_thumb.jpg post-39016-0-20692200-1302952326_thumb.jpg

post-39016-0-38331700-1302952355_thumb.jpg post-39016-0-26221300-1302954586_thumb.jpg post-39016-0-38154700-1302954634_thumb.jpg

Price: not too sure to be honest so $4000ono it is. I am open to offers on whole car and parts.

Parts for sale:

Greddy Front mount intercooler -- $200

Greddy type s coilovers -- $1000

Whiteline Adjustable swaybars (24mm front/20mm rear) -- $150/$150

Nistune ECU -- $400

QFM HPX brake pads (front/rear) never used brand new - $120

post-39016-0-69850400-1302952644_thumb.jpg

CES 3" mild steel cat back (magnaflow muffler, twin 3" tips) good cond - $450

post-39016-0-77910200-1302952720_thumb.jpg post-39016-0-35085700-1302952747_thumb.jpg

R34 fibreglass/carbon boot (clear peeling in small corner area) -- $150

post-39016-0-19025100-1302952811_thumb.jpg

R34 Standard airbox and snorkel w/ K&N hiflow panel filter -- $100

post-39016-0-15595300-1302952870_thumb.jpg

R34 Standard Fuel pump with bracket -- $80

post-39016-0-98310600-1302952923_thumb.jpg

BM50 brake master cylinder (i never used, guy i bought it from said it had been rebuilt 10,000kms ago from an r32 gtr i think) -- $100

R34gtt Engine cover -- $50

post-39016-0-52067000-1302953018_thumb.jpg

Rb25det coilpack cover -- $30

R34 boot lining/carpet -- $60

post-39016-0-41705800-1302953100_thumb.jpg

R34 standard plastic front bar with indicators (trimmed to fit FMIC, some scuffs etc) -- $200

R34 JIC Coilovers - unsure on exact model, condition unknown - would suit rebuild -- $350

post-39016-0-86382300-1302953222_thumb.jpg

2x transmission/oil coolers - one is davies craig other is unknown -- $20ea

post-39016-0-61168700-1302953291_thumb.jpg

R34 guard lining -- $40

post-39016-0-00987800-1302953335_thumb.jpg

R34 window washer bottle -- $35

post-39016-0-54133800-1302953383_thumb.jpg

Drift oil catch can -- $20

post-39016-0-81849700-1302953447_thumb.jpg

Greddy Turbo timer (missing a plug from harness, could be wired up easy) - $50

post-39016-0-69082600-1302953505_thumb.jpg

R33 coupe bootlid with spoiler/struts/light (scratches) - $100

post-39016-0-82435600-1302953588_thumb.jpg

R33 front fenders w/ indicators (one cracked) scratches -- $50ea

post-39016-0-91026800-1302953648_thumb.jpg

R34 pink label AFM -- $120

post-39016-0-02541600-1302954374_thumb.jpg

pair of 17" SSR wheels - gold w/tyres - unsure of offset 17" multistud -- $300

post-39016-0-77112700-1302954193_thumb.jpg

Thats about it!

If there is something you are chasing let me know and we may be able to work something out.

all prices are negotiable and postage is a maybe depending on item would prefer pickup - make an offer!

Location: Brisbane Southside

Contact:

Steve - PM or reply

mobile/sms: 0422 850 698

Cheers!

email: stephen.hendicott (at) gmail.com

Link to comment
https://www.sau.com.au/forums/topic/361154-r34-gtt-partoutcomplete-sale/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

want to have a squiz at the car. may know someone that will take it as it sits.

(I have a 32 as you know and do not need another car.)

want to have a squiz at the car. may know someone that will take it as it sits.

(I have a 32 as you know and do not need another car.)

Let me know when you want to come have a look Chris.

Once chris has looked at it guys and I know what's happening there I'll get back to you in regards to pulling bits off. Obviously if someone takes the car they get first dibs on the bits that are still on it.

Cheers

Let me know when you want to come have a look Chris.

Once chris has looked at it guys and I know what's happening there I'll get back to you in regards to pulling bits off. Obviously if someone takes the car they get first dibs on the bits that are still on it.

Cheers

No worries, I have yet to pick the car up yet, but I've been looking for a white wing for it :yes:

Hey mate, sorry to hear about your loss. How would the FMIC go fitting up to a S15? (is it R34 specific or generic?) If its not taken let me know.

Again, sorry about your loss. Feel almost dirty buying things from you under this circumstance.

Don't feel sorry for wanting to buy stuff from me. Let's me get 'some' money back :)

Sorry the fmic is spoken for ATM. Don't think it would fit s15 though without new pipework

Let me know when you want to come have a look Chris.

Once chris has looked at it guys and I know what's happening there I'll get back to you in regards to pulling bits off. Obviously if someone takes the car they get first dibs on the bits that are still on it.

Cheers

strip it!

fellow does nto want to see it in the flesh. says there is too much missing to put it back together.

after to harmonic balance and crankshaft how much

Not parting the engine just yet. I don't have the time for it.

Hicas bar I'll try to get off in the next few days, I'll send you SMS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...