Jump to content
SAU Community

Recommended Posts

I like to keep my car relatively clean and I am interested to hear what you (SAUers) reckon is the best way to a shiny, clean ride??

I have used Meguiars, Mothers, and Turtle wax ICE recently and cant really decide which I like best.

Please discuss...

Link to comment
https://www.sau.com.au/forums/topic/361527-whats-the-secret-to-your-shiny-ride/
Share on other sites

Then there's

* Menzerna

* AutoGlym

* Zymol

* Prima Car Care

* Optimum Car Care

* Lake Country

^^^ mostly USA stuff

Confused yet?

I wonder if there are "Reviews" on these products?

Secret? No secret - just some commonsense based on experience...

1) Wash with specialised car wash without the wax eg Meguiar's Gold Class or other

2) Clay Bar (if it's been in the open for longer than 6 months) eg Meguiar's or other

3) Polish eg Menzerna or AutoGlym (up to 3 grades)

4) Sealant

5) Canauba Wax

6) Wheels eg Zymol

7) Leather interior eg Zorbel cleaner (from saddlery shops) followed by AutoGlym conditioner

I use Turtle Wax ICE car wash

AutoGlym Ultra-Deep Shine polish, and Autoglym extra gloss protectant I think its called (the second stage of the polishing process)

Meguiars Ultimate Quik Wax for touchups.

Youve seen how my paint comes up...

Turtle Wax Ice polish is amazing stuff. I have a bit of Meguiars stuff, quik detailer is a winnar for car shows, non-acid wheel cleaner, clay bar kit, window cleaner, hot look tyre shine etc

Turtle Wax Ice polish is amazing stuff. I have a bit of Meguiars stuff, quik detailer is a winnar for car shows, non-acid wheel cleaner, clay bar kit, window cleaner, hot look tyre shine etc

turtle wax, is cheap crap(sorry shane) , in usa its the same as kitten in quality.

sorry but it can do a number on your paint over time.

depends on if its s dark car or white. different products work better .

Really there is hundreds of product brands out there. monky shine has wax that cost 24,000 dollars a bottle(not a typo ) , and kitten is 2 bucks from cheap as chips...

and Megs is actually 3M now, 3M is who makes all the pro stuff for Megs anyway. the old man Berry Meguar sold out

Megs soap, the NXT stuff or the new yellow one works fine.lots of smell good suds, and slick on the paint, NEVER USE A SPONGE !!!!!!

use a microfiber towel.and swap often , dry your car in a cool spot, without a hot engine, adelaide water is torture on paint, creates bad water spots

I use pro products from Megs , gold class works average at best, NXT is better but still won't last, and synthetic so you can't paint around it... the pro stuff (from rare spares ) is used for the buffer MEGS M105 to take out imperfections about $100 32 0z botttle. nothing compares for buffing japans acid rain, etc.

and I use a few other products fromt he pro line of a few companies. but clay bar,a high shine wax. and paint sealer. once its done right it stays shiny for ages , just a rinse and dry

Megs tire gel on all black outside bits.and hoses. lasts for months

Megs dash foam, smells yum and works a treat

Megs air freshner

orange cleaner for the seats and mats , unless they get too messy, then the cleaner you use in extractors for carpet, from woolies.

headlights MEGS M105 or aircraft lexan polish, or 3000 grit wet sand then M105 for perfection on bad lights

tinted windows, nothing with amonia. Megs or eagle one glass cleaner works good. , vineger and news print can scratch your glass over time. , then use glass wax to keep them smooth.you can clay bar windows too. if needed.

clay bars come in different aggesiveness if you didn't know ?? and aways use mist of either spray detailer or no water spray wash for lube while clay bar

wheels , either megs or mother wheel cleaner , purple bottle from Megs.

farcala is decent

my paint sealer is a secret but it is cheap around 20 bucks and works a treat for up to a year on garaged cars .made local too

you can put a cig out on the paint without damage to it.

once your car is done, its a quick process to shine up under 20 min , the first go round takes 6-10 hours if you use a buffer and take off acid rain etching. so stock up on beers first.

oh and some newer skylines use SUPERHARD paint, mostly 2000 S2 R34 and on .... look at your paint codes first. the super hard is a bastard to buff.

supercheap has bulk microfiber cloths cheap,I paid 25 last week for 25 of them.... orange ones , when on sale they come out to a buck a towel, work awesome

expect to spend 100 -200 on gear but it lasts a long time.

the usa Megs forum is a wealth of information for free, a direct line to the people who make the products and worldwide pros

self healing paint is coming on the newest nissans next year I think.

Edited by sapphiregraphics

Very interesting read :thumbsup: any thoughts or brand recommendations on cut and polish for light scratches?

Megs M105 will take out most bad spots, can be used by hand or machine and is paint shop safe. but not cheap, nearly 100 bucks a bottle for 32 oz but last for a long time , really you could do a lot of cars for the price of one bottle and share the cost around. ??? I would compare it to maybe a 6000 gritt wet sandpaper if one existed. cuts but doesn't harm the paint or clear coats . unless you have had a respray , then becareful, the resprays can be dodgy, like anything test a small spot first.

scratch X 2.0 would be a cheaper choice for minor scratches or swirls, used on my metallic black Monte carlo VR4 with better results then 100 dollar a bottle zymoil, but damn zymoil smells good..haha

DO NOT USE these on a hot car or in sunlight. (on a perfectly dry car only a tiny bit of water can make a mess ), do a small area at a time. use painters tape on anything black/trim, or matte painted. if you use a buffer, or make a mess by hand. if you don't remove it asap, it will be nearly impossible by hand to remove M105 , it will buff off the paint on washer nozzles too, beware.

it's not a deep nasty cut like kitten paste but it will remove acid rain from a osaka shipping yard. or even plastic burn marks from trolleys hitting your car. and finger nail marks from under handles.

if you use a buffer, don't use wool , use two proper foam pads, one to apply, one to remove with micro towel finish

After going to the EH show last year and trying Andrews Turtle wax Ice. I havent used anything else since. Its a lot easier to apply and it dosent leave white marks on the window trims. Everything is nice and shiny. Love it.

Thanks for the info Troy..you are a wealth of knowledge! I will try some of that pro 105 gear... Looks like I should try that bikini application system also!!LOL

Brad: Yeah I have some of that ICE polish but I dont reckon it shines as well as the meguiars stuff, but if you get it on the window rubbers etc you dont see it!(on the upside!)

Dion: yep I have picked up a bit of that quik wax on your recommendation after the last riverland show but haven't really tried it yet.

if you apply the tyre gel to all your black parts first the white wax wont stick to it. M105 is a ultra buffing compound, but even with just that on the car it will shine , the 105 is what you don't want on the trim, or to dry to much. make sure you have lots of light when you do it. on white cars its hard to see until its a day old. buffer time...lol

a real detailer tapes off the window trim anyhow, cause a buffer will scuff the rubber or worse tear it off. you don't need to go crazy with tape, just make sure its the blue painters tape or you will be cleaning glue for months.

on a side note, if you want to strip the wax off before starting from scratch, wax and grease remover works a treat and is safe on most things. I've used it on a tessarosa to remove interior , carpet parts, (italians glue friggan everything on the car ) it can discoulour cast plastic sheets, if used on the plastic door panels , retreat them asap with protectant, it takes them to a extremely dried out look. and prob, wouldnt be good for them long term. do not use it on fresh paint or rattle can paint, it will strip it off.

hear is a link to answer more questions

Megs, FAQ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...