Jump to content
SAU Community

Recommended Posts

Hey guys,

Before buying a car i've been looking at all aspects of what will be needed. I've got insurance worked out, but the next problem is parts.

Where do you guys buy your parts when you need them?

For example, pretending that i need new pads, as they wear out or a new exhaust manifold gasket... and other stuff like air filters? Is there a place that has everything i need? The car in mind is an r32 gtst and disadvantages are that no other model overlap (eg with a mustang, you can use falcon parts on them) with r32s and I've been told that parts are quite expensive. :D

Any help would really be appreciated.

P.S i have used the search

Link to comment
https://www.sau.com.au/forums/topic/36160-parts/
Share on other sites

Brake pads are readily available from Bendix and others - same as (Oz) GTR / 300ZX - DB1170 front, DB1220 rear.

Air filters are same as earlier (R30 / R31) Skylines, or Commodore. Oil filters are same as earlier Skylines.

Thermostat - I bought one for a VL-Turbo for my RB20DET. Even came in a nice Nissan box.

Any other parts, Nissan dealer can get them in from Japan - usually about 2 weeks delivery.

Worst case, you can try any of the numerous import wreckers.

Link to comment
https://www.sau.com.au/forums/topic/36160-parts/#findComment-721498
Share on other sites

Nissan can source just about everything for imports now directly from Japan. In fact when I did 2 exhaust valves last year in my RB20DET, I found them straight off the shelf in Melbourne. All nissan parts are expensive unfortunately, even for locally released cars. Example: My dads 1989 Ford Maverick (Nissan Patrol), he needed new window seals, pretty obscure part. Quoted $95 from nissan for the pair, rung up ford and got the exact same part (with nissan stamped on it) for $49.

In terms of body panels etc.. The local used market is pretty good for that sort of thing, people bringing in lots of container loads of used parts. Ive never had trouble finding bits for my 32, sometimes ive had to be patient though. Ive even had to get some obscure plastic interior and exterior parts and had no problems.

Link to comment
https://www.sau.com.au/forums/topic/36160-parts/#findComment-721554
Share on other sites

Supercheap Auto stocks things like pads for import skylines, and as people have been saying, places like Kmart even have things like the oil, oil filters, fuel filters, etc that you'll need.

Many of the parts are in fact common with other nissan models, and across skylines, so usually are pretty readily available. Nissan Australia, yep, can get stuff but its usually very expensive compared to other sources, and everytime I've spoken to them they've said "hmm, don't have it here, gotta get it from Japan, x weeks" so usually I turn to other sources.

For 2nd hand parts and panels, plenty of wreckers specialise in skylines and similar imports, again not difficult. Usually if you just wait on here for a month or so you'll find what you're after as well for a good price -- much cheaper than wrecker prices.

To be honest, when it comes down to it, parts are no more expensive than any other car out there that age. In fact, sometimes cheaper!

Link to comment
https://www.sau.com.au/forums/topic/36160-parts/#findComment-721559
Share on other sites

haven't had much hassle with getting parts, but of course only the expensive aftermarket guys make bits for 'em - ie upgrades - and everyhting else is genuine, and genuinely expensive.

example - air con relay (accident with a large spanner, don't ask) simple kinda 4 pin thing, hella one =$8 , but of course wouldn't fit in moulded block, nissan one, overnight from capital city (perth in this case) =$89 (managed to get trade, so $44, but still pricy)

Link to comment
https://www.sau.com.au/forums/topic/36160-parts/#findComment-721883
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...