Jump to content
SAU Community

Recommended Posts

Hi all,

this is a slightly strange question, (i have already asked in another section but thought this might be a better place?)

I am after some diagrams or pictures/schematic blueprint style pictures of RB 25/26/30's

I require them for reference material for a tattoo i am doing on a good friend, and unfortunately i cannot use a camera to see into my engine!!

something along these lines chevy-265-cid-v-8-engine.jpg

any help would be greatly appreciated! (:

Link to comment
https://www.sau.com.au/forums/topic/361759-engine-diagrams/
Share on other sites

thanks for the pic!

i did find that one but it was a tiny tiny pic so thankyou!

i will post some pics up when its finished / in progress

probs wont be for a while though! a lot of work to go into it.

im not going to do that exact pic either, im gonna do a different angle from just infront of the rocker cover/cam shafts

it will be tricky! but what i got in my head should look pretty killer

heres a different one i did if anyones interested

40326_154555227888529_100000021589724_478989_6143991_n.jpg

thanks again

!

Link to comment
https://www.sau.com.au/forums/topic/361759-engine-diagrams/#findComment-5775727
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...