Jump to content
SAU Community

Coolant Temp Sensor

08r3308

By 08r3308,
in Engines & Forced Induction

 Share

Recommended Posts

SargeRX8 Grand Master

SargeRX8

Posted
Posted (edited)

My car also has the same issue as OP, when starting on cold start in mornings(stock ecu) the car will start to about 1krpm and then die if I do not blip the throttle for a split second. Something seems sticky... Its like something isn't opening up when it should be.

I don't really understand the logic behind the water temp sensor causing the issue... If it was f**ked, a rev will not fix it. My temp gauge is working just fine so that gets ruled out I guess.

When I get it tuned, ill get the tuner to check it over and clean any shit thats cleanable.

Interestingly enough though, back when I was running a power FC it never did this. Always started perfectly. Going back to stock ecu(had stock, went pfc, now stock but going back to pfc soon), the problem came back.

Edited by SargeRX8
bubba Grand Master

bubba

Posted
Posted

Probably? it is definitely true.. there are two separate sensors, one for ECU and one for gauge.

Does it fix itself the instant you rev it? or are you giving it a few revs (and thus could be a time based thing)?

If the ECU temp sensor is fkd, after a short while the ECU will just assume the engine is up to temp and normal driving can ensue.

DJSimmo Community Regular

DJSimmo

Posted
Posted (edited)

OP: is your R33 a Series 1.5 or Series 2? I have a red coolant temp sensor as well my part number on the sensor is....

A27-611

L00

This part number on the sensor does not seem to relate to any nissan part number in FAST but it does say JECS on the sensor and had the nissan symbol

Edited by DJSimmo
  • 1 year later...
MatthewT85 Proficient

MatthewT85

Posted
Posted (edited)

i know this is years old, but does anyone else know for sure whats an option to replace the cts sensor in an r33 gtst?

will this one work?

http://www.ebay.com.au/itm/New-Genuine-INTERMOTOR-Nissan-Skyline-R33-GT-R-Coolant-Temperature-Sensor-/121056444459?pt=AU_Car_Parts_Accessories&hash=item1c2f86c02b

its says nearly every other nissan except gtst :wacko:

also i am gonna ask the seller, just cant remember my login and password atm

Edited by MatthewT85

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • eli995
      Looking for a part number for this part here

      By eli995 · Posted

      (Rb25det intake manifold) I’m having a hell of a time trying to find the full part or part number of this coolant hardline so far I was given these (Below) but they aren’t what I’m looking for and was told it’s the IAR or aac valve but that doesn’t seem to be it either. If someone could point me in the right direction it’d be greatly appreciated. Or if anyone has it for sale that’d be great too. I have recently purchased a greddy manifold and I can’t seem to find my old one to pull it off.  (Front Heater Return / Water Pipe (under intake): Primary part: 14053‑21U10 (front return pipe assembly for R33/R34 RB25DET) Alternative listing: 14053‑21U00 (same pipe, sometimes interchangeably referenced)   Heater Feed Pipe: Listed as 14075‑04U00 or feed-related variant 14053‑AG500)    
    • GTSBoy
      Duncan's V37.......race car?

      By GTSBoy · Posted

      This sounds cool. But, as per usual, anything really complicated like that, that I take on, constitutes a steep learning curve that I never actually "learn". I just get it working, install it and start using it. Then, when it breaks a few months later, I've got no memory of what I did, how I did it, or even the bloody IP address I gave it. I'm having more or less exactly that problem right now. My Proxmox machine was discovered to be non-responsive, and the VMs on it were ditto. Power cycle it to a stream of loud Dell beep codes - which was unpopular at midnight, I can tell you. Move it to the lounge room so I can HDMI it to the TV for a screen, see the boot messages complaining about the /PVE/data having all sorts of LVM problems, saying it needs to be fixed manually. And I'm like....great. How am I going to work out what I need to do? At least it wasn't the stupid Silicon Power SSD shat itself. Mental note for all readers - DO NOT BUY SP SSDS! They are shit. I have had one take out an entire VM setup already, and this one could have done the same. Maybe it actually has. Cheap Chinesium shitbaskets. I won't cheap out again, even on play projects with no budget. Because my time budget having to fix shit is worth far more than the cost of proper parts.
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      I do typically agree. These days even the screens most people use have more of a boot time than the main device. However, I've seen an interesting use of the RPi in vehicle, however it involves effectively building your own OS and MBR, as then it boots up exceptionally quickly, as you don't have everything needing to start up, and you can then also run it up as an RTOS, while still having more compute than an Android can give for things like display, and processing. A very huge task that would be though for Duncan, I'm not sure that's his skill set (or Arduino programming and wiring) ha ha. If end goal is definitely just water cooling, Arduino would be the simpler setup especially for a rookie. If he wants extra display stuff though, bashing some code in Python on an RPi may be the better result for both systems.   Unfortunately the new device I'm building at work which runs a display, is too slow of a display for dashboard style purposes. More extreme low power, update only a couple of times a day type system
    • GTSBoy
      Duncan's V37.......race car?

      By GTSBoy · Posted

      I don't like "actual computers" for in car use. They take time to boot up, have OS annoyances, and so on. Arduinos etc are ready to go a few seconds after power on, don't mind being agressively powere cycled, because everything is non-volatile, don't mind being shaken and stirred.
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      As Fred would tell us, it's all about interpreting the rules. It's not a water sprayer, it's a water mister... But everything else you've said, 100%! Even a raspberry Pi would be great, use HDMI out for a display, and add a raspberry Pi CANBus hat to read values out from the ECU.
×
×
  • Create New...