Jump to content
SAU Community

Recommended Posts

Currently in Sydney

2G firm....

original aerotech buckets

VN group A (NSV build with build plate)

original CSA alloys...

identical interor to orginal and exterior with all badges...

(seats alone would be worth at least 4g........)

143000km

chris

0478058818

email: [email protected]

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

more pics to come when i find them....

wont let me upload i will have to alter the type and then upload.....

i know.... i had some on face book but the pics have vannished due to my Facebook account being hacked and/ or it being monitored by the feds / acers/ asio/ asssic / dsto intelligence surveilance and recon etc... will post them up when i can find them.....

the seats and rims are phat.... best buckets i have ever sat in from a factory spec car..... they are awesome....

has stiff suspension too...... damn stiff,..... handles like it is on rails however it could do with some expensive rubber....

  • 2 weeks later...

no do not have any dyno sheets... it is prob not more than 120 kw at the wheels with the current set up... if need be i can get you a VP commodore motor with a twin turbo sr20 set up with dump pipes and cooler and piping aswell as braided lines that has been pro built for about 1600 more... that should be good for a safe 200kw at the wheels.... not bad for 3500 approx all up....

chris 0478058818

But dyno sheets help us tell how the car drives! It's an important part of selling a car, how else are we going to be able to tell how it behaves on the road?

Hi, can the stock R33 cat be included in this sale?

probably the only thing you would ever get related to gina -- some stocky exhaust part - (catconverter) and if you did happen to get sum, no doubt you would pay for it too............

pics of car please?

i have lost the cable that connects my phone to my computer so hence can not load photos of the car.... as soon as i find this cable i will upload.... for some reason the photos on face book that i have of the car are not supported on this site???

But dyno sheets help us tell how the car drives! It's an important part of selling a car, how else are we going to be able to tell how it behaves on the road?

it is an unmodded stockish Group A where everything is identical to the real thing except for the transmission, motor and the steering whee (it was built by Northern SPecial Vehicles and has a build plate.....

if it had been modded and had been retuned due to having some form of engine management i would defenitely put in a dyno sheet... and if you were looking for a high hp car for either track. drift or drat (which this is not) i would agree with you that a dyno sheet is a must to determine how it behaves etc.....

However i know that you are being a smart arse product of a wank stain and put this comment in for a laugh due to the comments which started the macdoogle files hehehehehee... have a good day smart arse!!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...