Jump to content
SAU Community

Recommended Posts

Hi all,

Im getting my r34 gt-t shortly and have future plans for it. My aim is to get around 350kw at the wheels.

Anyway i have already purchased an emanage with software, harnesses etc and im wondering if the emanage is going to do the job and get the results i want. If not ill just have to sell it and get a wolf or PFC

Thanks

Brendan

Link to comment
https://www.sau.com.au/forums/topic/36233-will-the-emanage-hack-it/
Share on other sites

If you wany around 350kw .... well dont buy anything now.. get a GTR or put RB26 on it,,, or else u going to pay $$$$$ for it.. trust me...

with all your part below

Parts|- *Greddy*: Full Auto TT + Profec B Spec II + Emanage. *Hybrid*: FMIC. *Apexi*: Power Intake Pod Filter + EL Meter Series2 Boost Guage + N1 Exhaust System. *GFB*: Hybrid BOV. *Sparco*: Accessories. *Whiteline*: Rear Subframe Align Kit.

max u will get is around 250kw max

Guest RedLineGTR

i believe the emanage will hack it but the issue is do u know people that can tune it well??? that is the main problem with some ecus some people cant tune them, i say talk to some preformance shops or dyno tuners etc...see what they have to say. Also good info can be found in the HPI DVD's And HPI Magazines one thier r34 gtt project...unless u have seen them already, they have some good info and came close to your goal of 300rwkw.

Well im planning to do all this over the next yr. My original plans were to only slightly modify it but now i have a better income they changed :rofl:

Im going work out exactly much money ill have over the next year and how im going to spend it.

I was thinking along the lines of a HKS GT3040 as i will eventually get around to getting forged internals.

My car should arrive sometime next month so while i have time on my hands i want to start planning.

No, the E-manage will not hack it.

For the HP you are chasing you will need bigger capacity injectors. E-manage doesn't support this. For what you want, Power FC, Microtech or Wolf are popular choices. Piggybacks & sensor benders rely on the factory ECU which has limitations. A fully programmable standalone is what you need.

Your budget is very optimistic.

that ecu will cost you say minimum $1200 (used price)

Tuning & AFM/MAP sensor $600

Injectors say $1200-2000+ if you're lucky enough to find bigass injectors to suit the Neo (R33 RB25 injectors are different and far more common)

Brakes & supension will need upgrading to make it tractable at that sort of power. $2000+

Fuel pump of course $300

Forged & balanced internals + gaskets/bearings etc. if you expect it to last beyond a week $2000+

A Twin plate clutch $1200 (used price).

Labour (unless you can do it all yourself) $2000+

There's 10 large - before you have a turbo, manifold, wastegate, front exhaust section & new undies.

you CAN get a complete RB26 for $6000. The GT-t gearbox has the same tough internals as the GTR. ECU's are cheap as. I would recommend consulting a specialist workshop & telling them exactly how you wish to use the vehicle. circuit/drag/motorkhana/street/or a bit of any or all.

You'll still need to budget for suspension & braking mods of course, and you'll want to rebuild the turbos with inconel wheels (a la nismo) but a lot less dicking around altogether,

& you might be able to afford those new undies...

mmmkay ??

The E-manage does enable you to use higher flowing injectors. Up to 150% of original injector capacity stated by GReddy but in reality they do support larger than that limit.

For the money the E-manage is a great bit of kit and very easy to program.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
×
×
  • Create New...