Jump to content
SAU Community

Recommended Posts

  • Replies 232
  • Created
  • Last Reply

Top Posters In This Topic

Hoping to go. I havent met any of you guys yet. Is it ok to just turn up. I will be bringing sxe32 with me. may just go in one car instead of both.

Certainly is fine to just show up... Just come and mingle with the group of people around the skylines... :)

And BOO at only one car.... Just make sure it's a sedan :)

well you can count me in I hope depends on what time I get off work :) not set finish time means not to sure but sounds like it is going to be a great night

oh hey slip I seen you after a night out on the turps mate you will be all good lol

See uz all there I hope :(

+ been a long time between cruzes for me too :ufo:

As the event organiser, I will allow the exception of Squizz and Dave to bring their Cefiros. Both are long term friends of mine and I see no harm in them bringing the two cefiros.

I really can't see how we can stop squizz from attending the cruise in his own car. He's a long term site supporter and a moderator and seeming this isn't an "official event" (read: not a club event because the club hasn't started yet) I don't see why there would be no reason for Squizz and Dave to be left out.

I really don't think people are going to look at us and say "OMG.. theres two cars in that cruise that aren't skylines.. omg how could they do that". If they were real car enthuisiasts, they would realise what type of car they are and understand why they are there.

If anyone has any issues with this, please raise it in pm, not in this thread.

Looks like I'll be there or be square! But Erin, seems there is a LOT of people going. What are we going to do if the carpark is still closed off??? Because I dont think maccas would want us.

Looks like I'll be there or be square!  But Erin, seems there is a LOT of people going.  What are we going to do if the carpark is still closed off???  Because I dont think maccas would want us.

Wholley begeebes dave! I totally forgot about that.

Hrm. This could prove... hard.

I might ring up and find out who manages the property and ask how long it's going to be before the carpark is fixed.

Actually. Alternatively, There is the other carpark across the road where the red rooster is that is a shopping centre carpark as well. That might be a goer.

Time for a mass pm I think.

ok guys i am in the working of getting my r32 trading in my pulsar with a gtir motor however i may not have ownership of the car at that time am i still able to meet up and greet everyone ????

Hey mate, hows things??

What type of R32 you getting??

Cheers Cam

Wholley begeebes dave! I totally forgot about that.  

Hrm. This could prove... hard.  

I might ring up and find out who manages the property and ask how long it's going to be before the carpark is fixed.  

Actually. Alternatively, There is the other carpark across the road where the red rooster is that is a shopping centre carpark as well. That might be a goer.  

Time for a mass pm I think.

Thats right Erin! Im not just a pretty face, infact some would say not even that! :D

hehe this cruise in on my bday :)

I probably wont have my car how i want it for the cruise either :P

Got lots to do yet, need to install IC, safc, avcr, sitc, vs rearbar, ces split dump then get it all tuned

oh and gotta book it in for whiteline works kit minus the shocks&springs

tight squedule :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...