Jump to content
SAU Community

Wtb. Stagea S2 Ecu

Race__24
 Share

Recommended Posts

kjb_r33 Experienced

kjb_r33

Posted
Posted

As the topic says, I'm after a S2 ECU and possibly loom if anyone has one. Any 4wd NEO ecu and loom will be ok.

Cheers

Aaron

I have a 0v801 S2 for a RS4S S2 manual here, has NISTUNE fitted already. ECU, plus nistune 350 delivered..

Race__24 Experienced

Race__24

Posted
  • Author
Posted

Hmmm, very tempted.

I'm looking to wire it up to my s1 engine so I'm not sure if it'll even work at this stage. It should tho, even if I have to replace some sensors with NEO ones. From what I've heard the hardest part is getting around the traction control but I'm pretty sure the RS4S doesn't have tc. Is this correct?

kjb_r33 Experienced

kjb_r33

Posted
Posted (edited)

Hmmm, very tempted.

I'm looking to wire it up to my s1 engine so I'm not sure if it'll even work at this stage. It should tho, even if I have to replace some sensors with NEO ones. From what I've heard the hardest part is getting around the traction control but I'm pretty sure the RS4S doesn't have tc. Is this correct?

Mine didnt have it, did have the flanges and so on on the inlet mainfold but they were never drilled.

I dont even know if the sensors ARE different, need to get someone to look at the part numbers.

Let me know anyway, it is cheap, i think its nearly 300 just for the nistune board, i bought another ECU when i had my stagea so i could swap them over, but i wrote it off so i kept the nistune ECU. Paid 120 for the ECU and then another 100 to get the board installed.

Edited by kjb_r33
  • 4 weeks later...
Brad_00 Newbie

Brad_00

Posted
Posted

Mine didnt have it, did have the flanges and so on on the inlet mainfold but they were never drilled.

I dont even know if the sensors ARE different, need to get someone to look at the part numbers.

Let me know anyway, it is cheap, i think its nearly 300 just for the nistune board, i bought another ECU when i had my stagea so i could swap them over, but i wrote it off so i kept the nistune ECU. Paid 120 for the ECU and then another 100 to get the board installed.

Do you still have the ECU for sale? and what is the complete part number of it, i have a 23740 0v802 that i think is stuffed and need a replacement asap? let me know

cheers,

kjb_r33 Experienced

kjb_r33

Posted
Posted (edited)

Do you still have the ECU for sale? and what is the complete part number of it, i have a 23740 0v802 that i think is stuffed and need a replacement asap? let me know

cheers,

Yeah, still got it, its a 23710 0v801, provided yours is a NEO rs4s it will work

Edited by kjb_r33
Race__24 Experienced

Race__24

Posted
  • Author
Posted

It's been a while as I've had other things to get done first, but I'm at the stage now where I really need to sort this ECU out. If anyone has one PM me what you want for it.

Cheers

Aaron

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

If you are going to the trouble of fitting a new loom why don't you fit an R33 GTST one and then you can use the much more common ecu and get a plug in Link for it or even plug in an R32 ecu and nistune that.

Race__24 Experienced

Race__24

Posted
  • Author
Posted

I think the R34 will be a better match as the r32 doesn't have VCT. I want a nistune as I can't afford any other management right now. If i was going to get something stand alone I'd wire it from scratch, but the S2 Stagea ecu will (hopefully) be mostly just pin swaps to get it to work.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

You can use Z32 which does have vct in the GTsT plug but if you want an R34 one get the Nistuned one above - auto ecu will work just as well on a manual as nistune will be setting the afrs and timing anyway.

  • 2 weeks later...
  • 3 weeks later...
too_much_boost Mentor

too_much_boost

Posted
Posted

Hi Mate

I have a adapter loom for S1 Stagea to piggyback an R32 ECU (or Z32 ecu with a couple of wiring tweaks). It comes with an R32 ecu remapped for 550cc injectors and z32 ecu.

You can have the lot for 300. You can let the factory ECU run the vct.

Cheers

Anthony

Race__24 Experienced

Race__24

Posted
  • Author
Posted

That sounds promising, but what year is the factory ecu from? Mine is the one that was only used for 1 month of production so I doubt it'll fit, is it possible for you to check the standard Stagea ecu number for me? Is the R32 ecu nistuned?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...