Jump to content
SAU Community

Recommended Posts

From time to time I go through the NSW vehicle standards to check up on revisions.

Currently the National Transport Commission is reviewing vehicle standards and plans to have them in place eventually Australia-wide.

Could be a good thing for VIC residents !

The NTC is also asking for interested parties to have input.

Anyway, there is no information available online right now for the guidelines and limitations for modifications under the Model Laws and Policy Library.

Only the original model from 1999.

I guess they are finally compiling a concise review.

http://www.ntc.gov.au/viewpage.aspx?documentid=2030

Link to comment
https://www.sau.com.au/forums/topic/363285-good-news-or-bad-news/
Share on other sites

I hope everyone ends up with a Queensland style mod plating type of thing. Works out better for everyone.

or WA

both win.

hell i would just be happy with NSW emissions testing for EPA certification. That would be the best outcome.

But fear it... All states could end up like Vic (someone had to say it)

Are we keeping certain people in gov't jobs?

On a more practical note (and without having to convert our cars into wheelchair-lookalikes-to-qualify-for-exemption), it would be prudent before any reading of parliament to register many cars in this club as an "Enthusiast" Category for exemption.

Pure weight of numbers might create an exclusion/exemption clause might it not? > Every relevant Chapter in every Club of every State will need to be involved eg Mini Car Club, SAU, RENEW, Prelude Aust. etc

This newly established category could be juxtaposed to "Vintage" or "Classic"

My thoughts (since I cannot see myself taking this lying down)...

Your thoughts?

or WA

both win.

hell i would just be happy with NSW emissions testing for EPA certification. That would be the best outcome.

But fear it... All states could end up like Vic (someone had to say it)

I was going to say it if you didn't. confused.gif

Good ol' nanny Vic sure as f*** won't go backwards with traffic laws or vehicle standards, there's simply too much money to be made by keeping the current system and continually tightening it until the only option will be to buy a brand new car, and crush it when it's due for the 1000km service...

It'd be good if Vic would go to a, better, vehicle standards system, but it still won't:

-Fix the roads

-Change the hoon laws

-Do anything about reducing road toll or the number of casualties

And end of the day, would you rather your car be harder to get on the road, or harder to keep there?

heaps of new laws,old cars forced off the road, Australians forced to buy australian built cars as other new cars wont meet aus build code..possiblity?

That's where we're heading.

Look at the last 5 years, especially in Victoria, vehicle standards have tightened, hoon laws introduced, more and more places are giving up issuing RWC's as it's simply too much of a PITA. Recently the new ESP law, which had special exemptions for cars that don't have ESP (f****** lol, wtf was the point), it'll keep going until the public majority feels safe or has something bigger to fear, and the police sent out to control that menace.

As long as the majority of voters *THINKS* that whoever they voted in is doing their job by controlling these menacing "hoons", as suicide rates, road conditions or any other problem gets ignored, the people creating these new laws will stay exactly where they want, in power, getting paid. Democracy isn't about what's wrong or right or best for the majority or the long run, it's about keeping just enough people satisfied that they can re-elect you. Same deal with gun laws, the alcohol/drugs/marijuana battle, liquor licensing. if you tallied everyone who opposes each item, they would BECOME the majority, unfortunately it doesn't work like that...

I'm ranting alot lately, no more coffee for me.. biggrin.gif

Edited by blk94r33

Are we keeping certain people in gov't jobs?

On a more practical note (and without having to convert our cars into wheelchair-lookalikes-to-qualify-for-exemption), it would be prudent before any reading of parliament to register many cars in this club as an "Enthusiast" Category for exemption.

Pure weight of numbers might create an exclusion/exemption clause might it not? > Every relevant Chapter in every Club of every State will need to be involved eg Mini Car Club, SAU, RENEW, Prelude Aust. etc

This newly established category could be juxtaposed to "Vintage" or "Classic"

My thoughts (since I cannot see myself taking this lying down)...

Your thoughts?

Terry I think you should represent SAU and set down an exemption category with specifics to the NTC.

They are asking for public input.

Don't forget to have window tinting increased to 30 % instead of 75 %, change the induction mods permitted, permit FMIC to all cars and maybe push your luck and increase the Db exhaust levels.

Thanks.

Terry I think you should represent SAU and set down an exemption category with specifics to the NTC.

They are asking for public input.

Thanks.

Will need to get CAMS Sec Doreen to supply us (rather than just me) with database of all affiliated clubs (like BMW Drivers Club, Corvette Car Club to name a few more) eh?

And there are also many out there which are not affiliated too (like OzFoz etc).

Even in SAU, some state clubs are and some aren't if I'm correct Alex.

Hopefully WA would get ignored by the rest of the Australia like when it comes to most other road/transport issues. The one that comes to mind is the phasing of RON 91 for E10 the other states are pushing; meanwhile there is no sign of E10 in WA at all! :closedeyes: or the car restrictions for P-plate system; again still no mention at the WA DPI)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...