Jump to content
SAU Community

Recommended Posts

Hey guys ive just purchased a brand new dump pipe by Turbo Xs for my R33 Series 2 GTS-T i have put a picture below of the dump pipe, should i be paying someone to install it or is it fairly easy to put on without any dramas?? if any1 knows what is involved in putting one on lemme kno, also i have got a jasma catback exhaust so will this dump pipe be alrite even though i have a standard cat??

Cheers

3150nsi.jpg

Edited by SLY333
Link to comment
https://www.sau.com.au/forums/topic/363502-how-to-install-a-new-dump-pipe/
Share on other sites

That sensor looks like it is in a bastard of a spot!

Be very careful with the bolts in the back of the turbo, you don't want to snap them. As said spray them with bolt off or wd40 etc and leave that sit for a while. If the bolt feels like it's getting tight as your undoing it, it might pay to do it back up a few turns then start undoing it again so you don't snap it.

undo the sensor at the plug then unscrew it from the dump once you have it off the car if you cant get to it with a spanner while the dumps still on the car.

will give more power yes! and a different noise

those sensors can be a pain to get off, make sure you get the right size spanner onto it as they can be rather tight and the last thing you want to do is to have a spanner slip and stuff the bolt. Also get all new gaskets and personally i used a bit of gasket cement on them to make sure you get a decent seal

Dude, its definately job you can do yourself. I bought my first skyline (95 gtst) a few months ago and i have done everything with the exhaust myself. All my bolts including oxygen sensor werent too bad, some were pretty stiff but you get that. The guys in the post have given you good advice with the wd40, so follow that. Im not the most experienced with cars, and usually stick to just doing oil changes etc. Im lucky that i can always get my old man to help me with my cars, which comes in handy. I would definitely have a go yourself, and if your concerned just try get someone who is handy with the spanners to come round for a few beers!

I have found the skyline to be really easy to work with, and if you get stuck this site is an excellent source to get your answers.

All pretty easy, should be able to punch it out in about 2 hours working on your back with stands, obviously put the o2 sensor in the new pipe out of the car would be borderline impossible in the car. You can get onto 5 out of 6 bolts with a small 3/8th breaker and a 13mm socket (bottom 2 from under the car) I cut down a small 13mm spanner to get to the middle passenger side bolt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Crazy how good the aero bar looks compared to the stock one
    • Yes, but you will need to rewire all the things that are different. CAS, coils, etc. Yes, but there is no IAT. What? You can use anything you like. It just has to be hooked up so that it will work.     Or are you wanting to just plug and play without having to do any thinking/work?
    • It's been a little over a decade since I bought the S15. As I did on my socials, I'll share some of my favorite pictures from over the years further below. If you haven't realised, pretty much all the pictures in my posts are ones I've taken.  In terms of updates, I don't have pictures, but I acquired a near-perfect pair of fog lights from a friend of mine, so those got swapped in for the pair I already had. As for the JZX110, I just got it back from being fixed. A few weeks back, I was on the highway when I suddenly drove over something with very little time to react. It was probably the size of a soccer ball, but it went under the car and banged into the underside pretty loudly. I pulled over and realized the fluid leaking was fuel, and of course, it was right near my exhaust. This required replacing the fuel tank. If you happen to be in the same predicament, thankfully this car shares a fuel tank with the JZS171, IS200, and IS300, so it wasn't too painful to replace. Enjoy some pictures as mentioned above, including the carnage from the fuel tank and a bonus picture I came across which shows how ridiculously shiny the Bugels are on the 110. So many more pictures I could share of the S15 but this will do for today, enjoy. 
    • Welcome.  Was the mistake the car, or joining us? 😏
    • Yeap, was me and the daughter getting coffee before heading to the new joint to measure up the fridge space and taking some pics that the solar installer wanted of the switch board
×
×
  • Create New...