Jump to content
SAU Community

Recommended Posts

Hi everyone. Friday night, Pre-Drift Nats cruise.

Location: Car park at the end of Bourke St, Docklands

Near the corner of Bouke St and Harbour Esp.Mini Map

This is the intersection, just...Follow the Yellow Road

Car Park looks like this

Time: 7pm - 10pm

Adam and the guys from Fulllock Motorsport want a big meet for all interstate people, and D1 drivers from Japan etc etc.

So get out the wax, wash the cars and come along for a big meet-up and LOTS of pics etc.

Come along and say hi to everyone, meet the people that have put the Drift Nats on for all you guys.

No idiotic behaviour... burnouts etc will no be tolerated.

Remember, you are there to represent your respective forums/clubs in the eyes of interstate and international visitors, and the general public too.

There will be police presence at the meet, not sure how long, or at what stage

They wont be there to defect anyone or anything sinister like has happened to other 'clubs' (not naming names there)

So dont be too worried about them, if your being good, they are going to do the same and not hassle us directly.

Afterwards, if people want to cruise, then that can be decided on the night.

This is just a big meet is a MASSIVE area to get a number of the 'better' car clubs of Melb together to show how big, and how much quality the Vic Imports scene has.

Apologies for the late notice, but we still expect at least 50+ cars

So dont be someone who misses out on this.

Hope to see you there.

Ash, SAU-Vic Events Co-ordinator

In conjunction with Adam and the Fulllock Motorsport Team

Link to comment
https://www.sau.com.au/forums/topic/36386-fri-19th-pre-drift-nats-meet-up/
Share on other sites

Dont wanna get everyone too excited.

HPI - 'might' come along. i am in contact with one of the guys from there.

So we'll see if they want to come down or not.

I'll get back to everyone when i know.

So if your only 'thinking' about coming, stop, and come along just in case :)

btw i assume we are allowed to bring friends who dont have skylines?

cause my mate has a 180 and his bro has a 'rolla with a 4AGZE worked engine (his first car on his Ps lol) want to come along too.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...