Jump to content
SAU Community

Offering A Service To Nsw Members


oweban
 Share

Recommended Posts

yeah it's the loom that plugs into the unit.

I put the dog in the garage when it was absolutly belting down with rain one day and the motherf*cker chewed the loom now theres exposed wires everywhere lol.

Link to comment
Share on other sites

  • Replies 86
  • Created
  • Last Reply

Top Posters In This Topic

Hi Mate,

Would you be able to get me the part number for lid (the one that opens) of the centre console, and the boot for the hand brake, of an R34 GTT.

Thanks Paul

Link to comment
Share on other sites

Hi Mate,

Would you be able to get me the part number for lid (the one that opens) of the centre console, and the boot for the hand brake, of an R34 GTT.

Thanks Paul

Shoot me a VIN number via PM; I'll see what I can do for you :)

Link to comment
Share on other sites

Hi Mate,

Would you be able to get me the part number for lid (the one that opens) of the centre console, and the boot for the hand brake, of an R34 GTT.

Thanks Paul

Actually, as a quick display: I managed to find the centre console lid fairly easily.... the handbrake boot is being a prick though. I think 96921 (in red) is the complete part.

Brett: I'm still on the go with yours, looking through all the diagrams making up a list :)

YVvA2.png

Link to comment
Share on other sites

Ok, so I can't guarantee that it'll be all for the latest models, but I've got my hands on FAST, and I've pulled some part numbers for SAUNSW members today. I'm looking at extending this service outwards; keep in mind I'll reply when I can to it.

I'll need a fairly detailed description of what you're after, unless it's fairly obvious (such as "R33 rear hub stud" or something). I will need the VIN too, as it's all dependent on that.

Winner. I think it has the R34's as well but I dunno. Someone throw me a VIN and I'll test.

Very useful for checking up those small little things you need to get!

Would you be able to get me a part number for an OEM steering wheel for a non turbo Series I R34 25GT? (09/1999 model)

Cheers.

Link to comment
Share on other sites

Would you be able to get me a part number for an OEM steering wheel for a non turbo Series I R34 25GT? (09/1999 model)

Cheers.

I've used another VIN I found for an R34 GT, and that was built in December, 2000 (I think that's an S2).So if this isn't the exact one, then I've done the best I can with what I've got; as stated, I need a VIN to get accurate numbers.

YVtAx.png

Link to comment
Share on other sites

Actually, as a quick display: I managed to find the centre console lid fairly easily.... the handbrake boot is being a prick though. I think 96921 (in red) is the complete part.

Brett: I'm still on the go with yours, looking through all the diagrams making up a list :)

YVvA2.png

Hi Mate,

My cars a 1998 R34 Sedan VIN: 6U90000ER34017016

When you say the handbrake boot is prick, does that mean it's only available in red? I'd only be interested in a black one.

If you could get me the part number for the centre console lid that would be much appreciated.

Thanks

Paul

Link to comment
Share on other sites

Hi Mate,

My cars a 1998 R34 Sedan VIN: ER34 017016

When you say the handbrake boot is prick, does that mean it's only available in red? I'd only be interested in a black one.

If you could get me the part number for the centre console lid that would be much appreciated.

Thanks

Paul

oh, just meant that it looks hard to find the genuine part number; i sifted through the listings but didn't really find it; i'll have a look again with your VIN tonight. I'll also let you know if that part code for the centre console lid is still the same for your exact model :)

Link to comment
Share on other sites

oh, just meant that it looks hard to find the genuine part number; i sifted through the listings but didn't really find it; i'll have a look again with your VIN tonight. I'll also let you know if that part code for the centre console lid is still the same for your exact model :)

Thanks, much appreciated!

Link to comment
Share on other sites

haha, won't be leaving work till 9pm tonight :P it's kinda fun sifting though FAST though.

Also: Just so everyone knows, I won't be home from Friday morning till basically Sunday arvo, so no checking then, but I'll make lists of stuff people want then go for it.

And you guys suck, srsly, if there WAS anything there (and there's not) my mechanic will find it this week when he takes $2000 off me :( that's just labour... i've already supplied all the parts le sigh

Link to comment
Share on other sites

Were there different series? Any BNR32 VIN work?

They're all the same any model GTR

I rang a dealership and they're $15 each, there's 8 of them. So F that!!!

Got 14 of them and the turbo to dump ones made from Inconel instead

Thanks anyway mate :)

Link to comment
Share on other sites

Owen,,,you couldn't have picked a worse franchise to play Part Interpreter. Nissan's fast system is absolute rubbish,,,basically the crappiest know in the industry.

Cheers

Neil.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Maybe of interest, a little while ago I spoke to one of the guys from Rajab Racing Developments and he hinted to me they could be developing a new cast exhaust manifold. Incidentally, they have already made one for the barra and it looks functional 
    • So Bathurst coming up so really need to get this new ECU in. I regret going to flex fuel and all the headaches associated with DBW with cruise etc....a miss the simplicity of Power Fc   I make enough power that I should have just gone back to 98 but...anyway Turns out with the std inlet I cant really go any bigger than 60mm DBW so wasnt able to play with that aspect of the update.  
    • We're bringing Pizzas back!! Pizza Runs, to be specific... We had a practice Pizza Run a while ago, and everyone has been screaming for a proper one... So you've asked, and now we're delivering! Since your tastebuds are tingling, feast your eyes on the event details: Date: Saturday 27th July 2024 Meet Location: Parking Lot - 1 Parkview Dr, Sydney Olympic Park Meet Time: Meet at 5.30pm for a 6.00pm departure Destination: Talotta's Pizzeria, 1-3 Bridges St, Kurnell Map: https://tinyurl.com/saunsw-talottas  We'll meet at the carpark on the corner of Parkview Drive and Australia Avenue in Sydney Olympic Park. When we leave the parking lot, we'll head down Australia Ave, and turn right onto Homebush Bay Drive at the large roundabout near DFO. As soon as we turn onto Homebush Bay Drive, we will be turning left onto the M4 to drive through the new M4/M8 tunnel! Everyone loves a bit of RB action through a tunnel.... We'll exit the tunnel at the Gardener's Road exit, and turn onto Princes Highway, where we'll follow it onto Rocky Point Road and then onto Taren Point Road. Once we reach Miranda, we'll turn left onto Captain Cook Dr, where we'll continue on straight until we reach Talotta's Pizzeria for some pizza goodness!!! There is a small carpark at the destination. Limited spaces are available, but there will be plenty of street parking in front of Talotta's There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. This is an official SAUNSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • The time has come once again, for another SAUNSW Sunday Session! You all know the drill by now, fam... This is the perfect event to catch up with the SAUNSW crew, hang out for a coffee and a bite to eat, and get in some photos and friendly banter! So without any ado, here are the details: Date: Sunday 14 July 2024 Meet Location: Penrith Krispy Kreme (at Penrith Panthers - Panthers Place, Mulgoa Rd, Penrith) Meet Time: 8:00am Map: https://tinyurl.com/saunsw-penrithkk  This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAUNSW event and will be run under a Motorsports Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • Who's itching for another cruise...?? That's right! You are! And so are we! And what better cruise to run than an Old Pac Run!! So without any ado whatsoever, here are the details for you to save: Date: Saturday 22nd June 2024 Meet Location: Cowan Truck Stop (Pacific Motorway - Refer to Map) Meet Time: Meet at 7:00pm for a 7:30pm departure Destination: Gosford McDonald's (65 Pacific Highway, Gosford West) Map: https://www.google.com.au/maps/dir/Cowan+Rest+Area+-+Truck+Stop,+Cowan+NSW+2081/mcdonalds+gosford/@-33.5145054,151.1875996,11z/data=!4m39!4m38!1m30!1m1!1s0x6b0d50be6b302f7b:0x52a920c40b292919!2m2!1d151.1590113!2d-33.6115097!3m4!1m2!1d151.1632842!2d-33.6047898!3s0x6b0d509345312641:0xb510e358747a5332!3m4!1m2!1d151.2008176!2d-33.5274838!3s0x6b0d4e5adac43725:0x611c05fee203a98a!3m4!1m2!1d151.1925869!2d-33.4598502!3s0x6b0d4926bcb9e627:0xd95f510d7f39b402!3m4!1m2!1d151.2072744!2d-33.4523186!3s0x6b0d49138231a221:0xaf20c78b79e9db5a!3m4!1m2!1d151.2318957!2d-33.4309951!3s0x6b0d4989b4996d83:0xeae9af9b71739b59!1m5!1m1!1s0x6b0d4aaa920441e5:0x33f1be63f4680e2f!2m2!1d151.32463!2d-33.4269!3e0?entry=ttu Definitely an easy one for this cruise, meet at Cowan Truck Stop and jump straight onto Old Pacific Highway! Final stop at McDonald's which has plenty of parking all around. There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. This is an official SAUNSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
×
×
  • Create New...