Jump to content
SAU Community

Recommended Posts

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

Hey man, either the Vios or Zeta with graduation is my preference, I'm not sure what the difference is between them. It's street registered so the Maxis is over the top, I'm not sure on FRP/CF/Kevlar yet, depends on weight differences.

What were you thinking?

Edit: Just found this- vios is supposed to sit you a little lower. It does this by being recessed a little more on the bottom and having a slightly more curved back. I find this seating position more comfortable, especially for a street driven car. The vios also has smaller shoulder bolsters and the thigh supports are lower, making it a more livable seat for day to day. I have sat in a zeta too and it is also very comfortable. It is probably the seat i would choose for a more dedicated track car.

Probably go for the Vios because head clearance is a concern for me.

Edited by neil_se

I cant tell the difference between the Vios and Zeta seats tbh. They look virtually the same apart from slightly wider shoulder supports. But im not fussed, Vios sounds good in graduation. Mine is also for my street car.

So was it clear if there is rails supplied or definitely not?

Ah so they do come with something. Cool. Ill probably just fabricate my own rails to suit anyway.

Do you have height issues atm in your silvia? I dont remember you being overly tall back in the days of the s13 club with Jason, chris and the guys. Lol or maybe you are and its just my memory is shot.

I will be home tomorrow I can weigh the sample seats. I do not think there will any weight difference between the F/g, carbon or kevlar, as the are all wet laid . The carbon or kevlar or just for show.

Payment needs to be cash as I have to transfer payment to o/sea supplier in China. Could do paypal, so could use payal if you pay the fees.

Seats will need to use genuine Bride railings to suit the model seat you pick. The Gias and the Cuga for example have different mounting bolts centre.

The seatings come with basic sliding rails, so unless you can make your own mounting brackets to suit they will be no use.

SAAS I think make some rails to suit so you can use the supplied rails. I will see if I can find out some more info.

If someone onlys wants a single seat, still register your interest, as I might buy the matching pair.

I've been looking at photos, and 34 gtr bucket seats don't mess with the standard seat belts. Will these ones really be an issue?

The seat belt buckle mounts on the rail, not to the side of the seat, so they will work fine. No need to use a racing harness.

I can get copy Bride or Takara 4 or 5 point racing harness's if any wants.

have you actually used a std seatbelt with a full bucket? not exactly the best combination tbh...

the seatbelt doesnt hug the body (unless your quite huge), the seatbelt just goes from one edge of the seat to the other so you not held in by the seatbelt around the waist...

and yep the buckle is mounted on the rail but using a bucket its not exactly easy to get too, its quite a way down the side unless you make up some sort of extender plate so it sits higher...

have you actually used a std seatbelt with a full bucket? not exactly the best combination tbh...

the seatbelt doesnt hug the body (unless your quite huge), the seatbelt just goes from one edge of the seat to the other so you not held in by the seatbelt around the waist...

and yep the buckle is mounted on the rail but using a bucket its not exactly easy to get too, its quite a way down the side unless you make up some sort of extender plate so it sits higher...

Will the belt wear away at the side of the seat if a standard belt is used? I'd love a seat like this, but with the ability to keep the back ones.

OK, looks like I'll be on the lookout for a pair when I get my car :D

Are you wanting and talking about full buckets or recliners?

Recliners will be fine with standard selt belts, but you will have issues with full buckets and standard seat belts.

have you actually used a std seatbelt with a full bucket? not exactly the best combination tbh...

the seatbelt doesnt hug the body (unless your quite huge), the seatbelt just goes from one edge of the seat to the other so you not held in by the seatbelt around the waist...

and yep the buckle is mounted on the rail but using a bucket its not exactly easy to get too, its quite a way down the side unless you make up some sort of extender plate so it sits higher...

Kawasaki man is referring to r34gtr seats, so recliners not full buckets, hence my reply.

I think we are all getting confussed with what he wants.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...