Jump to content
SAU Community

Recommended Posts

Well it might cause quite a few of you a lot of pain to know that I am considering moving on from my R32... I know, I know I'd be an idiot to sell it and all that, but this is only an Expression Of Interest because I have been thinking about this for at least a year now and my mind still isnt made up, so I need your opinions.

I am thinking of parting with my 1992 R32 GTS-T for somewhere around $13,000 (which I think is very reasonable).

Here is a "short" list of specs:

1992 R32 GTS-T M-Spec

Spark Silver metallic with custom vinyl graphics.

Engine:

- 1993 R33 S1 RB25DET conversion.

- Genuine Garret GT30/76R turbo with custom internal wastegate.

- Custom polished alloy intake piping, turbosmart triple ply silicone joiners.

- Z33 Air-flow meter + compact air pod (breathes plenty of air).

- JJR Adjustable exhaust cam gear.

- Custom front-mount intercooler 600x300x76mm with custom stainless piping, triple ply silicone joiners ad T-clamps.

- Turbosmart SS blow-off valve

- Genuine Splitfire coil packs + NGK spark plugs (gapped to 0.8mm).

- JJR oil catch can + breather.

- 45mm Alloy radiator with A'Pexi 3BAR cap and Davies Craig high temp hoses.

- Engine fan removed, Cooltemp 14" thermo fan installed with shroud and electronic fan controller (never gets above 90 degrees).

- Genuine TRUST Power Extreme II exhaust system (3" mandrel), TRUST front pipe and split dump pipe.

Electronics:

- A'Pexi PowerFC ECU.

- Turbosmart E-Boost street.

- Brant alarm (needs replacing).

Driveline:

- R33 GTS-T gearbox.

- TOMEI billet short shift kit.

- Exedy Hyper-single ceramic button clutch kit.

- Custom single piece tailshaft with Z33 uni-joints.

- Standard diff with 140W motosport oil for more lock (doesnt whine or clunk).

Brakes:

- Standard rotors, wheel bearings replaced under 20,000kms ago.

- Overhauled standard calipers with Bendix ultimate pads (I also have EBC Greens still in the box).

- Braided brake lines (ADR approved).

- Motul RBF600 brake fluid.

- Overhauled master cylinder.

Suspension & steering:

- TEIN Super-street adjustable coil-overs.

- Billet alloy adjustable caster rods.

- Genuine Nismo front strut brace.

- HICAS removed and locked (entire system removed), new rear rack ends and knuckles installed.

- Front steering rack overhauled, new boots, rack ends and tie rods.

Wheels & tyres:

- Volk Challenge 17x7 and 17x8 (don't know offset on these *very light-weight*.

- Federal 595RS tyres (about 50% tread) slightly over sized 225/45R17 and 255/40R17.

Interior:

- Stock standard seats, carpet etc.

- Isotta MegII genuine leather steering wheel.

- RAZO gear knob.

- Autometer boost guage in pod.

- PowerFC hand controller and E-Boost street unit mounted neatly on dash (no holes drilled).

Sound system:

- Alpine head unit (about 5 years old)

- FUSION 600W 4way amp powering FUSION speakers (very good sound but no fully sick sub-woofer).

Body:

- Genuine GTR V-Spec front bar (genuine Nissan).

- M-Spec side skirts and rear pods.

- Rear bar is slightly damaged from scraping on a car trailer but I plan to have it resprayed.

- Custom Nismo stripes.

- No accident history or dodgy repairs.

This car has been lovingly looked after, always garaged and serviced with Motul fluids every 5,000kms. I have done almost all of the work myself (so I know it's done right) any of the work that I have had done at workshops has been done by either Trojan Motorsport or ESP Racing.

Glenn at ESP tuned this car in this set up to 275rwkw (370rwhp) and over 500nm of torque at only 14.4psi but when not driven hard it is very comfortable and easy to drive on the street.

Pictures attached.

What I am asking is whether I should sell this car and upgrade (keeping the next car a secret at this stage) and is the price right?

NOTE: I will be putting a year's rego on it and can assist the purchaser in getting it passed over inspection.

Cheers,

Mick

post-17958-0-20553300-1305859424_thumb.jpg

post-17958-0-96105500-1305859441_thumb.jpg

post-17958-0-47178100-1305859852_thumb.jpg

post-17958-0-67465000-1305859876_thumb.jpg

post-17958-0-18934400-1305859890_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/364939-bullet32-eoi/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

hey mate,

i can see that its had a bit of work , but it's still a 32.

maybe around $5000???

Thanks Jester,

I realise that R32's are going cheap these days but there's no way I can go that low.

Thanks for your feedback though :)

Link to comment
https://www.sau.com.au/forums/topic/364939-bullet32-eoi/#findComment-5822595
Share on other sites

Wow what a deuche!

Mick that's such a nice car, I was actually thinking about it just the other day, such a nice power curve strapped to a rock solid 32!

It must be a hard choice to let her go.

So good luck! And by that I mean bad luck, so you get to keep it :D

Link to comment
https://www.sau.com.au/forums/topic/364939-bullet32-eoi/#findComment-5822713
Share on other sites

Wow what a deuche!

Mick that's such a nice car, I was actually thinking about it just the other day, such a nice power curve strapped to a rock solid 32!

It must be a hard choice to let her go.

So good luck! And by that I mean bad luck, so you get to keep it :D

Thanks Pat,

I'm having serious trouble deciding what to do... I love it and want to keep it but something else has come up and I want it as well... Decisions, decisions.

Cheers mate :)

Link to comment
https://www.sau.com.au/forums/topic/364939-bullet32-eoi/#findComment-5822725
Share on other sites

Hey Mick, that looks like one kickass 32.

if i hadn't already bought my 34 a few months back i would probably try to convince you to sell to me...

I'd be all over it for $12k - $13k.

I think you should keep it :D

Link to comment
https://www.sau.com.au/forums/topic/364939-bullet32-eoi/#findComment-5822774
Share on other sites

Scam a poor old lady - you can have both!

Hah! - Good idea, now to find a gulible rich old lady :)

Hey Mick, that looks like one kickass 32.

if i hadn't already bought my 34 a few months back i would probably try to convince you to sell to me...

I'd be all over it for $12k - $13k.

I think you should keep it :D

Thanks man,

I would only sell to a proper enthusiast like yourself who would really appreciate it. :D

Link to comment
https://www.sau.com.au/forums/topic/364939-bullet32-eoi/#findComment-5822787
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...