Jump to content
SAU Community

Recommended Posts

Small bumps in the road on corners send my car skitting across the road with a huge shudder through the ass of the car. Possible causes?.... New 18" wheels fitted recently, rear shocks leaking something (not sure what) therefore maybe they are in need of replacement? Am I on the right track with any of this. Its a little disconcerting. I have king springs all round and have had no problems with them since I put them in six months ago. Any suggestions appreciated.

cheers

Link to comment
https://www.sau.com.au/forums/topic/36537-why-is-my-rear-skipping/
Share on other sites

Dude, i had this exact same problem with my car awhile back.. turns out the rear shock absorbers were stuffed.. it stopped working completely. i say more that likele your rear suspension.. go to pedders and get them to do test your shocks.. it only cost $14 or something so worht it i reckon.

go to a decent suspension place(not sure about pedders) and ask them to check it out. most times I have done it at the one near me. they don't charge me to tell me what it is. then if the price is right I get it fixed there.

but yeah it sounds like the shocks are gone, oh well. guess its time for coilovers! :(

Small bumps in the road on corners send my car skitting across the road with a huge shudder through the ass of the car. Possible causes?.... New 18" wheels fitted recently, rear shocks leaking something (not sure what) therefore maybe they are in need of replacement? Am I on the right track with any of this. Its a little disconcerting. I have king springs all round and have had no problems with them since I put them in six months ago. Any suggestions appreciated.  

cheers

My car is doing the exact same thing. Will get my suspension looked at.

Thanks for this thread to all involved.

Yes that's what happened to me, the back would get all jittery around corners and over small bumps. I took out the back suspension and after I undid the pillow mount bolt on one of the shocks to get the spring off the shocky collapsed, I could push it all the way down and it would just stay there and when you lifted it all the way up and jiggled it it would fall down all by it's self.

I had previously taken the car to Pedders and they said that they where soft but other then that they where fine.

I have the same problem when going over small bumps (a good example is going "across" a main intersection where trucks have left big dips in the road). The rear end just sorta skips and I get a light squeel of the rear tyres (only under accelleration).

My rear shocks are only 10mths old, rear tyres are 9mths old and I've got Pineapples fitted.

Do any of you guys get axle tramp under accelleration ?

Yeah I think its the back right shock. Cause when I get under the car and shake the car there is a hell of alot of bumping/knocking going on coming from the shock. Oh well, hope this doesn't phcuk up my skidpan day on sat :devfu:

Anybody wanna sell me a set of rear coilovers?

I have the exact problem you describe, it appeared after a skidpan day. Wheel alignment and wheel balancing cured most of the problem but I still occasionaly get the shuddering.

I got my shocks tested at ABS and they said they are borderline acceptable, I say they are f*cked - every little bump gets picked up and the rear feels floaty. So time for bilsteins I think, or i'm considering getting standard shocks again ($170 each)

Greg just chuck in the bit extra and get Bilseins they are $245 each.

I have the exact problem you describe, it appeared after a skidpan day. Wheel alignment and wheel balancing cured most of the problem but I still occasionaly get the shuddering.

I got my shocks tested at ABS and they said they are borderline acceptable, I say they are f*cked - every little bump gets picked up and the rear feels floaty. So time for bilsteins I think, or i'm considering getting standard shocks again ($170 each)

True, but its not the money thats deterring me from the Bilsteins, its bumpy roads! I think the Bilsteins will be a bit too stiff. But I guess there's only one way to find out. Hmm and then there's the decision of Whiteline vs Bilstein, although apparently they are similar :

craz0 thanks heaps for your help! :D i posted a thread on this topic but no one replied! I'll go ahead with the bilsteins, keeping the standard springs because I need the ride height to clear driveways and bumps etc. thanks again

edit: just looked at your photos and was amazed to see your car is the same colour as mine (paint code KN6, yeah?). yours is the only other skyline i have seen in our purplish/dark grey/charcoal colour! I was beginning to think my colour was a custom order or something :) anyway laters,

sorry for the hijack of thread i recommend you get a wheel alignment and wheel balance for starters, could save you a lot of money.

Slamm, definately sounds like your shocks are rooted. Also coil overs are completely overrated when it comes to road grip, that is unless they are setup correctly and used with the ideal ride height. Sounds like you have good springs already so some good shock inserts for your standard struts would be a cheaper and more suited to your criteria, that is if you want to grip not slip!

Greg, for the roads you travel on, I would recommend a firm spring with a medium gas insert. From experience too firm on the shockers results in too much steering effort.

I am glad that my nismo shocks and springs are still good at 100,000k and when they do give up I hope to get them kitted and reuse them.

Thanks to Prank for fixing the new posts tab, that is probably why Greg's thread went unanswered. :)

thanks for all the input ppl. My shocks are screwed. at least one is. Oil (or fluid whatever) is leaking everywhere. They are standard 33 struts replaced when I got my springs done. I lowered the car a month after buying it and when we pulled the old struts out they were both bent. possibly caused by the car being strapped down tight on the boat over?!! the dealer i bought the car from replaced the old struts with, well, another pair of old struts and six months down the track this is where I am. the handling is shocking atm. just like a boat. will tell you how I fare tomorrow at skidpan day. I know I probably should be wary of going tomorrow but I will make a decision there as to how it feels.

still nobody got some old dusty coilovers or adjustables they want to get rid of? or maybe I should learn a lesson on 2nd hand stuff. you just never know.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...