Jump to content
SAU Community

Recommended Posts

  • Replies 3.6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

OccupyAdelaide in Vic square. Best lol I've had in ages.

Apparently threatening civil disobedience if they're evicted... So what... They're going to put dish washing detergent in the fountain?

OccupyAdelaide in Vic square or somesuch. Best lol I've had in ages.

Apparently threatening civil disobedience if they're evicted... So what... They're going to put dish washing detergent in the fountain?

whats the go, anyone driving an import has to hit rev limiter all the time..........................why cause i really dont get it :blink:

i manage to drive the boxer and i dont feel the need to bounce it for 2 seconds b4 changing is this a secret squirrel thing :glare:

Think is because it spinning up, hence even though the speedo is saying 160 the car is only doing 100, while he's bouncing off the limiter the car is still accelerating. If he shifts to early hell fall off boost and he'll have to wait until he reaches his 6000 boost threshold again.

i got mates with r32's and 33's and i thought it was just how u had to drive em to get on boost :whistling:

import = fail

snip

thems fighting words

:D

its funny really a lot of commodore and falcon owners are loving the benefit of turbos and shit and if its wasn't for the RD the japs did they probably still wouldn't be using them :nyaanyaa:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...