Front Pipe For 3.5Inch Exhaust

[overd0se]

Hi,

i recently purchased a kakimoto n1+ 3.5inch catback and im wondering what front pipe would you use i thought it would be simple and get a 3.5inch front pipe but it seems there are not many around and the ones ive seen that are remotely big are expensive.

would a 3inch do the job say 2 70mm into 80mm and a 3.5inch cat/straight pipe?

[XRATED]

yes.

[cannabiscorpse]

Definitely suggest the wanted to buy section if you havent posted in there too mate.

[Moodles2]

For 350kw+, its generally recommended to have 3.5" through

The new HKS frontpipe has 70mm inlets and a 85mm (3.5") outlet

[R31Nismoid]

Depends on setup. As above, even over 300rwkw a 3" after the merge and before the CAT can hurt performance.

[DVS JEZ]

For 350kw+, its generally recommended to have 3.5" through

The new HKS frontpipe has 70mm inlets and a 85mm (3.5") outlet

Ive been looking for these but nengun website say discontinued other than these 2x 70 into 80mm for 600 is the best i have found

[Moodles2]

I imported the new HKS one (=sct_1402"]http://perfectrun.jp/src/detail.php?pid=20044&pname=STAINLESS%20STEEL%20FRONT%20PIPE&maker=HKS&maker_id=20&result_mode=qui&cbid=101&carid=101001_10101&scate_id[]=sct_1402 2*70mm to 85mm) recently. The old HKS one is 2*60 to 80mm which was discontinued ages ago

[Beer Baron]

yep, the new HKS ones are kick arse. not really new anymore though. I bought my first set about 3 years ago. they used to call them the drag front pipes and the others were just the normal ones (twin 60mm like everyone elses). they are expensive but when you get them you can see how and why they are better than the others.