Jump to content
SAU Community

Recommended Posts

I am in the process of istalling a sabelt 6 point harness. The shoulder straps are easy peazy off the harness bar, and no problems with the gut straps either.

Went to mount the crotch strap and struck a snag. The threaded end of the eye bolts are not long enough to go through the double skin floor on a 33 skyline.

My idea is to drill a hole in the top then use a hole saw on the bottom so as to enable me to put a nut on the eye bolt using a socket. Failing that, Are there longer eye bolts (rated) available for the job. Anyone?

Link to comment
https://www.sau.com.au/forums/topic/366848-6-point-harness-issue/
Share on other sites

Not too bad if you have them adjusted correctly, ie, lap belts pulling down onto your thighs hard, then everything else adjusted from there.

Most guys run into issues when they have the buckle up round their guts, that's far too high, should be sorta just above your package.

Not too bad if you have them adjusted correctly, ie, lap belts pulling down onto your thighs hard, then everything else adjusted from there.

Most guys run into issues when they have the buckle up round their guts, that's far too high, should be sorta just above your package.

Make sure the crutch strap is tight. cause if it's not you can slide forward in the seat under breaks, and your balls will catch the weight of your body.

I have been experimenting with different positions and yeah, You are both on the money. Nice and low and firm seems to be the best option.

I feel like a seat with arms, They dont allow the body to move around much but I guess thats the idea.

At the risk of sounding like a wanker, once I realised that I should run my harnesses tight, light, REALY tight, I reckon my driving improved massively. It's like you're completely part of the car, no moving around at all.

It's also not remotely uncomfortable, its funny, but once you're moving you don't even notice how tight you are in the car.

Better in case of a big acco too I'd like to think.

yep, first time you drive a car on a circuit with a proper seat and proper harness you can't believe how much better it is. I reckon going from basic seat with belt to proper seat and harness is probably worth up to a sec a lap, but more than that it means you can do lap after lap at the same pace. with you not having to brace youself in various parts of the cabin and not gripping the wheel so tight you can drive with your fingertips and toes and all the feel of what the car is doing is magnified 10X. best thing you can do to a road car to drive it on the track is fit good seat and harness.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...