Jump to content
SAU Community

Recommended Posts

Im not trying to burst your bubble here but as mid life crisis said I wouldnt build this with any kind of reliable performance in mind..

if you are building it purely for nostalgia sake you would be better off just grabbing an old supercharger off ebay and sticking a holley on top should only cost a couple of grand.. I wouldnt even worry about what power it made just make it work..

Its up to you mate but you either have a lot of cash to burn or your just plain crazy :laugh:

Lil bit crazy i guess, money isn't to much of an issue as it will be a long term project. I'm not really concerned about performance to much, but it will just be a weekend car and maybe see the strip twice a year. Thanks for the help guys, really appreciated.

I guess you live in one of the states the doesnt allow v8's in LC/LJ Rana's anymore?

I have seen plenty of Blown red motors...and I can think of only one that goes ok and even then it breaks all the time.

My advice would be a 265 valiant 6 with injection.

I can tell you now that you could spend 20k on a blown red motor and you still wont be as quick as the Mopar 6

i know a guy with a supercharged either 186 or 202 (not entirely sure). he has it in a track car (old holden of some sort, can't remember). it's not the most powerful thing in the world. only makes about 200hp. it's only running a carby though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...