Jump to content
SAU Community

Recommended Posts

Gday Fellas

Ive been looking alot more seriously lately at getting my hands on one of these beasts

for those of you who i havent had a chance to chat to im looking at the M35's

as ive been looking i began to think of possibly going through the import process

ive come to you guys to see what your thoughts are in comparison to buying one already ashore

id love to know how the prices and hastle stack up aswell...

i just rekon the love of the import would make you appreciate it soo much more once you find.. "the one" lol..

anyway.. give me your ideas and thoughts ( especially in regards to price and hastles etc etc )

:thanks: .....Daniel

Link to comment
https://www.sau.com.au/forums/topic/367644-to-import-or-buy-in-aus/
Share on other sites

Jetwreck has a good one for sale, depends on what you want.

I knew which options I wanted, and was looking at importing one, but then I found one for sale which was already imported. I was still the first Aus owner, but I didn't have the Jap hassles.

Also depends how fussy you are :P

What are you looking for?

haha craig lives litteraly around the corner from me

i havent decided what i want just yet cose im still on bloody P plates... which rules the AR-X out

and i cant say i dont want a 250t and the same with the axis... ahh decisions haha...

@slippylotion... how many problems did you have importing.. and how did you go about doing it

i wouldnt mind having the opportunity to import... but if one that i see pops up i will be sure to snap it up :)

i havent decided what i want just yet cose im still on bloody P plates... which rules the AR-X out

So you want an N/A M35? Theres only one option then; a Series 2 PNM35 from Northshore. Pretty sure you cant import and comply one yourself, they're the only people with the relevant credentials to comply them in the country.

So you want an N/A M35? Theres only one option then; a Series 2 PNM35 from Northshore. Pretty sure you cant import and comply one yourself, they're the only people with the relevant credentials to comply them in the country.

yeh ive heard that... i think im going to have to go and have a talk with those blokes from northshore

i wouldnt mind the PNM35 axis..the interiors on those look soooo stunning!

looks like ive got a few hard decisions to make...

if i were to import.. would they be the guys you would go to for compliance?

If you were to import as far as I know they're the only guys in Australia approved to comply a PNM35.

When do you get off your Ps? Will NSW let you drive a 206kW 4WD N/A 3.5L Stagea and not a 206kW 4WD turbo 2.5L??? That makes a lot of sense... :rolleyes:

Northshore are the best place to go for M35's in Aus, I've not heard a bad word about them. If I'd decided to go for an M35, that's more than likely where I would have gotten one from. If you want to import go to Kristian from Iron Chef Imports. I got my C34 through him, and he was fantastic to deal with.

If you were to import as far as I know they're the only guys in Australia approved to comply a PNM35.

When do you get off your Ps? Will NSW let you drive a 206kW 4WD N/A 3.5L Stagea and not a 206kW 4WD turbo 2.5L??? That makes a lot of sense... :rolleyes:

Someone else may know better, but to the best of my knowledge you cant private import a PNM35 and get Northshore to comply it - they just wont do it.

As for the rules of what P platers can/cant drive.. theyve never made sense :P

haha the rules are freaking rediculous...

he only ones theyve banned are those below...

STAGEA AR-X FOUR M35 4D WAGON V6 2495 cc TURBO Multi 4A 2001 TURBO V6

NISSAN STAGEA RS4 WC34 4D WAGON 6 2498 cc TURBO Multi 4A

From.............

http://www.rta.nsw.gov.au/licensing/downloads/200909_prohibited_vehicles_list.pdf

so yes... apparently they will allow you to drive he PNM35 haha... thats what drew me to the stagea in the first place

i was looking for a wagon first of all, to have my road bike in when i go on tours (cycling)

and also somthing with a little grunt.. the stagea was the only way to go haha...

probably one of the only turbos im allowed (legally that is)... one year of greens left..

do you guys agreee that by having a 250t or an axis i would be able to get away with it?

we all how much of a @#$% those highway patrollers are ;)

do you guys agreee that by having a 250t or an axis i would be able to get away with it?

If it was me, I'd risk it for just a year to get the car you want. They hardliy give you a second look, if you behave yourself that is :whistling: .

Some of the cars I see driving around with RED & green P's are obviously illegal (huge FMICs, BOV's venting to atmosphere, looooowwww suspension etc etc) & they seem to get away with it.

However, if you take a while to find the right car you could find you won't have an issue for very long at all....

Good luck with the hunt.

Not sure Dunc, have to call Northshore and ask if Ben will comply a private import.

What a joke. Two cars, same power, weight and drive, one legal one not. Surely they have some back door to cover themselves there, so they can claim to have banned all M35s?

thanks Leon, yeh i rekon that im going to take my time looking,

not just that for each month that goes by the budget goes up haha ;)

i think the next thing to do is wonder over to northshore...

yeh look.. the P's rules are all effed ! that list just shows it

im using it as a loop hole and ill see where it gets me.. haha

probably without a licence for the second time..

You guys are so lucky you were before the time of this bullshit set by the RTA

those rules came in on the 1st July.. my birthday was the 12th :mellow: (dohh)

Anyways.. really appreciating the advice and warm welcome :) ( first thread)

Luckily for me my mate owns Import Compliance Centre here in Adelaide, so for me it was a very easy process.

If Northsore are the only guys complying the PM35 I doubt very much they would comply it for you if you bring it over yourself. Bit of a sh*t thing if that's what they would do but I suppose they are just keeping a strangle hold on the evidence to make the outlay getting it worth while.

Luckily for me my mate owns Import Compliance Centre here in Adelaide, so for me it was a very easy process.

If Northsore are the only guys complying the PM35 I doubt very much they would comply it for you if you bring it over yourself. Bit of a sh*t thing if that's what they would do but I suppose they are just keeping a strangle hold on the evidence to make the outlay getting it worth while.

this is true... once i have a chat to them ill let you all know

i may not even end up going for the PM35.. might just go for the high end axis or... yeh... who knows haha

this could be fun, and am looking forward to the experience which ever way i go ! :)

If Northsore are the only guys complying the PM35 I doubt very much they would comply it for you if you bring it over yourself. Bit of a sh*t thing if that's what they would do but I suppose they are just keeping a strangle hold on the evidence to make the outlay getting it worth while.

So when was the last time you gave $30'000 away to a stranger?

The cost of getting evidence is very high ($30'000) and that is the test is successful...... personally I am happy that someone was prepared to put their money at risk to get the PM's.

So when was the last time you gave $30'000 away to a stranger?

The cost of getting evidence is very high ($30'000) and that is the test is successful...... personally I am happy that someone was prepared to put their money at risk to get the PM's.

As I said, I understand why they do it. But why can't they comply a PM for someone that buys a car in Japan themselves. I would imagine they would/could charge $3500-4000 for compliance. This gets the 30k back pretty quick. That's a nice premium over the $2500 usually charged for compliance on an nm35. This would still allow you to bring one over cheaper than what you could buy in a yard. The big part of them not doing it would be missing out on the easy 4k profit on the car, plus profit on the cost of compliance they would make by selling you one from their yard.

This is the point I'm making!!!

Edited by slippylotion

Who says they don't? AFAIK no one has asked Northshore to comply a car imported through someone else. They might do exactly what you suggest.

It's also their reputation though, if it was my business I wouldn't want someone importing a dog then telling all their mates that my business did the compliance, or worse, "I got it through XX".

Remember that $4k profit on the car also covers the time necessary to find a nice, clean car, verify everything, service it, etc.

I bought my car from Northshore, and yes I probably could have saved some money buying direct from Japan, but in the end it suited me at the time. They had exactly what I wanted, in stock, at what I thought was a reasonable price. Ben bent over backwards to help me out, and I was a pain in the arse, having never bought a car from interstate before. It was easy for me, and I was prepared to pay for the convenience. At the end of the day my time is worth something, and I couldn't be happier with the result!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
×
×
  • Create New...