Jump to content
SAU Community

Recommended Posts

Hey guys I got my 100k service done with the kudos kit. I got it done at a well known mechanic in the Wollongong area.

I lowered my idle revs the other day with the plastic screw (r34 gtt). The air flow one I think it is?

It was sitting on around 1100-1200 as that's how I got it.

I lowered it to the reccomennded 650 and since then I can hear a sorting of rubbing sound every now and then like it the timing belt?

Does this sound likely? Should I raise my revs? Take it back to the mechanic? Or is the belt just wearing in??

Hey guys I got my 100k service done with the kudos kit. I got it done at a well known mechanic in the Wollongong area.

I lowered my idle revs the other day with the plastic screw (r34 gtt). The air flow one I think it is?

It was sitting on around 1100-1200 as that's how I got it.

I lowered it to the reccomennded 650 and since then I can hear a sorting of rubbing sound every now and then like it the timing belt?

Does this sound likely? Should I raise my revs? Take it back to the mechanic? Or is the belt just wearing in??

I've had a couple of 100000 services done and no belt noise.They could of put it on too tight take it back and get them to check,better to be safe than sorry. :D

could me lowering the idle revs done anything??hmm i could be making myself think this but there may be a dip in power.oh really? hmm i like the first comment better then the second haha. i might give him a call.

no not at all.it sounds like a rubbing, you can only hear it on idle.its not a squeak its a rub and it does it over and over while idleing, as if when something turns around its hitting something. if that makes sense. i could probly do a youtube video if need be.

Ive adjusted my timing belt(gates belt) 3 times my self. First time it made a scrubbing kind of sound it was loud. Definitely too tight. Now its just down to a tame whirr which is normal if you are using a gates belt. A gates belt has almost no stretch and no room for tolerance. If you are running the belt too tight it will make noise right throughout the rev range as there is constant strain. Its a pain in the arse loosening it, pretty much everything off again just to get to the damn tensioner.

First time took me about 3 hours, second time to adjust took about 30 mins to pull everything off. I reckon I can do a full timing belt change on an R33 in about 1 hour now.

This is mine:

Most horrible sound my car has ever made. Its gone now and as I said just a faint whirr.

Edited by SargeRX8

simple solution, piss off the gates and get a genuine nissan belt! I had so many dramas with my previous skyline and the gates timing belt. All the mechanics I took it to said that it was normal and to let it 'wear in' and the noise would disappear. 8000km's later and it was still making that humming noise.

I have one of these belts on my own car as well, there are two different gates belts as far as i am aware, the one i have is the "race" version and is blue, it makes a light whirring noise, although your seems louder, or it could just be that my car runs a solid top end and jun cams which are quite loud and it may not be as noticeable.

provided the tension of the belt is ok, i cant see there being a problem, apparently very strong belts, hence the noise, but i wouldn't buy another one, the nismo seems to have the best rap, or genuine

100% belt noise, its definately tighter than it should be. Ill get a video tomorrow of how mine sounds. Its not loud(sometimes when warm it CAN get a little audible) but definately not that noticeable. It is if you stick your head under the bonnet.

And why the hell would you remove it? Adjust the tension, thats it. They are great belts, better than Nissans. Nissan belt is softer so it stretches a tiny bit to give the belt a tiny bit of play room. Get this tensioned right and she will be fine. Its not going to break, its not gonna snap, its not going to kill your engine if its fitted right. Noise is noise, its normal.

Get it adjusted and after a while you wont even notice the tiny whirr. Its inaudible from the cabin.

100% belt noise, its definately tighter than it should be. Ill get a video tomorrow of how mine sounds. Its not loud(sometimes when warm it CAN get a little audible) but definately not that noticeable. It is if you stick your head under the bonnet.

And why the hell would you remove it? Adjust the tension, thats it. They are great belts, better than Nissans. Nissan belt is softer so it stretches a tiny bit to give the belt a tiny bit of play room. Get this tensioned right and she will be fine. Its not going to break, its not gonna snap, its not going to kill your engine if its fitted right. Noise is noise, its normal.

Get it adjusted and after a while you wont even notice the tiny whirr. Its inaudible from the cabin.

+1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...