Jump to content
SAU Community

Recommended Posts

Hi,

I have no idea where to go in Perth to get my turbo timer put back in.

i had an immobilizer installed for licencing reasons and the gentlemen who put in the immobilizer disconnected my turbo timer without telling me.

i need it back in asap as its my first turbo car i have no idea where to take it.

Can anyone suggest somewhere that will do a good job and not cost me my whole paycheck?

Link to comment
https://www.sau.com.au/forums/topic/368597-turbo-install-in-perth/
Share on other sites

any of the major shops

Xspeed, hyperdrive, allstar garage etc.

not sure what they would charge but it cant be too hard.

Why dont you get onto the immobiliser install guy and take it up with him? usually u shouldnt f*k with any other of a cars systems if you are doig a job right so get him to hook it back up again...

Hi Chloe,

Do you know what the turbo timer is? (greddy, apexi etc)

I'd recommend posting those details up here first, depending on how bad it's been disconnected one of the dudes on here may even be able to do it for you. (ie: might just be one wire)

Alternatively call up a few of the workshops and explain you have a '_____ turbo timer that has been disconnected on an R34, how much to install it/fix it then work out based on price and reputation of the workshop where to go.

In the meantime don't worry too much. The manufacturers don't make the cars with turbo timers so it's not necessarily vital, just drive your car easy for the last leg before your destination (ie; dont thrash it to your driveway then switch it straight off) or alternatively just sit with the car on for a minute before switching off =)

-Steve

Yeah, my first turbo car (180) had one when I got it, but haven't bothered with one in any other cars since. Just drive nicely and off boost for the last couple of minutes before you stop, and then you should be safe. I got into the habit of doing that when I was living at home with the olds, had a really loud exhaust on my 33 and went out cruising late-night, didn't want to annoy the neighbourhood by leaving it idling away in the middle of the night.

If you really want it though, any decent auto electrician shouldn't have any problems doing it.

Edited by Dingus

Hi Chloe,

Do you know what the turbo timer is? (greddy, apexi etc)

I'd recommend posting those details up here first, depending on how bad it's been disconnected one of the dudes on here may even be able to do it for you. (ie: might just be one wire)

Alternatively call up a few of the workshops and explain you have a '_____ turbo timer that has been disconnected on an R34, how much to install it/fix it then work out based on price and reputation of the workshop where to go.

In the meantime don't worry too much. The manufacturers don't make the cars with turbo timers so it's not necessarily vital, just drive your car easy for the last leg before your destination (ie; dont thrash it to your driveway then switch it straight off) or alternatively just sit with the car on for a minute before switching off =)

-Steve

Hi Steve,

I will have to look when i get into my car after work, its still in the back of my car.

it was completely cut out, all the wires were cut and they didnt tell me, i notcied it on my back seat when i was half way home so went back and they said they wouldnt be able to install it because 'its legal to have turbo timers' i thought that was bs i have seen a lot of my friends with turbo timers

Thanks for the advice tho

Chloe

you can have one legally if it is part of the alarm/emobiliser.... so that if someone tries to get in then the engine will shut off...

i have passed the pits with mine on and he simply asked me to shut the engine down.... same as the police whenever i get pulled over...

dont waste your $$$ going to a workshop.any good auto electrician can fit/refit a turbo timer

Hi StevenCJR31

I dont know any auto electricians, hence why i asked on here about it. If you can suggest any that may be interested in helping me out, would be much appreciated. : )

Chloe

you can have one legally if it is part of the alarm/emobiliser.... so that if someone tries to get in then the engine will shut off...

i have passed the pits with mine on and he simply asked me to shut the engine down.... same as the police whenever i get pulled over...

They are not legal if they are built in to the alarm or immobilizer , they are tolerated though and generally the pits and police are OK with them.

ADR 25-Turbo timers are not to be fitted to vehicles manufactured on or after 1 January 1972 (ADR 25 Anti-

Theft Locks). ADR 25 requires that the normal function of the engine only occurs when the ignition

lock is in the engine on position.

You may find it difficult to find a reputable person to fit the turbo timer with the immobiliser , not because of the ADR issues but because a relay bypass must be wired into the alarm to disable it while the turbo timer is operational , leaving the car unsecured and the installer liable.

here is a nice thread , read the comments by the alarm installers in it and the stuff on bypassing security

http://www.skylinesaustralia.com/forums/topic/356357-turbo-timer-vs-alarm/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...