Jump to content
SAU Community

Recommended Posts

We have to have a 36mm restrictor on the intake of the turbo, so this severly limits HP and rpm. Currently makes about 340rwhp @ 5800rpm with the restrictor.

The car is for sale, this is the list of mods

1998 Nissan 200sx, S14a series 2

The only S14a racing in Improved Production in Australia

Current lap record holder on Wanneroo Raceway short circuit

Body:

Paint by Damage Control Panel and Paint

Carbon Fibre Rear Wing, Gurney Flap and End Plates

Cwest skirts

Genuine front bumper integrated brake ducts with Luxury lower lip

Extensive Maitland Roll cage that links through the firewall to the front struts

All bitumen and seam seal removed

Seam welded

Interior:

Painted interior very well presented

Array of Autometer Gauges and LED Shift lights

AIM Lap Timer

Vello Race seat with head side restraints

OMP 5 Point harnesses

Engine 1: (currently out of car)

High Compression 11:1

Wiseco forged Pistons

Manley Racing Connecting Rods

Apexi Head Gasket 3 layer metal

ARP Bolts

Knife edged crank

ACL Race Bearings

Greddy Winged and baffled sump

Big $ Ported Head on flow bench

Angled Valves

Brian Crower Race Valve Springs

Brian Crower Titanium retainers

Race Cams and adjustable cam gears

ARP Mazworx Long Head Studs

Full Metal Jacket crank pulley

Engine Accessories:

Custom Garret turbo

6 boost exhaust Manifold

Apexi Racing External Waste Gate and screamer pipe

Big $$$ custom 36mm intake restrictor as per IPRA Regulations

Koyo triple N flow aluminium racing radiator

Very large Race electric Fan

Davies Craig Electric Water Pump

1.5ltr Expansion tank with 3 consistant bleeds of engine and radiator

Large Nismo fuel injectors

PWR Intercooler with light weight alloy piping

Braided lines used in engine bay

Bosch Fuel Pumps with undercar surge tank

HKS Oil cooler and remote mounted oil filter

Quick drain fuel adaptor

Driveline:

OS Giken twin plate clutch and light weight Moly flywheel

Nismo Roller pilot bearing

SR20 to RB25 Skyline gearbox adapter plate

New RB25 Skyline PAR Racing Straight cut Dog Gear box 5 speed

Skyline GTR Tailshaft

Skyline GTR Half Shafts

Skyline GTR Rear Diff with 3.7:1 ratio

New Nismo 1.5 way racing LSD (Adjustable tension)

4 x Enkei RPF1 light weight racing wheels 17 x 9 on car

8 x fresh 255/40/17 Yokohama A048 tyres

Electrics:

Haltech Platinum 1000 ECU

Full custom rewire

Warning lights for Oil pressure, Water Temp, Charge

Gauges for Oil Pressure, Oil Temperature, Water Temperature, Boost

LED multi stage Shift lights

Data logging ECU

Haltech adjustable boost controller, for in car adjustable

Suspension and Brakes:

Full Coil over with adjustable ride heights

Adjustable camber tops and upright mounting plates

Koni Racing independent bump and rebound adjustable Shocks

King Springs (Many sets of different spring rates)

Whiteline adjustable sway bar

All control arm bushes are polyurethane with excentric (offset) centres

Skyline GTR alloy rear uprights

Racing Roll Centre Ball joints and adjustable height tie rod ends

Front Brakes:

Wilwood 6 piston Billet Calliper

Wilwood 340x36mm rotor with light weight alloy hats

Rear Brakes:

Wilwood 4 piston Billet Calliper

Wilwood 309x28mm rotor with light weight alloy hats

Adjustable bias valve

Braided lines front and rear (No rubber anywhere)

Large brake ducts to center of rotors

Spare Engine:

Engine 2 (Currently in the car)

Wiseco Pistons 9.5:1 compression

Eagle Rods

ARP Bolts

ACL Race Bearings

Ported Head

Angled valves

Apexi metal head gasket

ARP Mazworx Long head studs

Full Metal Jacket crank pulley

Spare Parts:

Spare RB25 Skyline Gearbox 5 speed

Spare Skyline GTR Diff 4.1:1 (Locked)

Spare painted Front Cwest Fibreglass bumper with large undertray

New spare Front Rotors

New spare Front Hats

New spare Front and Rear brake Pads

New spare Crank Angle sensor

New spare Apexi 3layer metal head gasket

8 new spare NGK racing spark plugs

New spare Electric Davies Craig Water Pump 110lpm

4 spare new Enkei RPF1 17x9 +22 rims

4 Spare coil packs

Spare igniter

Spare painted Rear bumper

$48000

Call

Ashly Barnett

0417 936 001

post-9414-0-36654100-1309346580_thumb.jpg

  • 2 weeks later...
  • 2 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
×
×
  • Create New...