Jump to content
SAU Community

Recommended Posts

I'm planning on ordering some Whiteline adjustable swaybars for my S13 today, but I've heard good and bad stories about the Whiteline bars. I don't know which to believe.

Has anyone compared the Whiteline bars to a Jap brand such as Cusco, ARC or Nismo? Is it really worth paying almost double the price of the Whiteline bars for a quality Jap brand?

Please help!!

Link to comment
https://www.sau.com.au/forums/topic/36913-swaybars-whiteline-vs-jap-brands/
Share on other sites

Tell us what's good and bad people told you? sounds interesting.

What I understand is that the material used to make swaybar in OZ all use same tube/beam from BHP (or similar), unless someone import the material from oversea..

Some use tube to make swaybar..

id say design is also crucial in terms of what is better...for example, front strut braces that go back towards the firewall instead of just straight from strut top to strut top could be advantageous? or, cusco's triangular rear strut brace?

i'd say they'd be much better than aussie made ones simply because they've spent the R&D dollars...

Hi guys, interesting topic. We can have the "quality" argument for ever after all spring steel is spring steel right? And the Japanese buy their spring steel from Australia anyway.

For me the issue not one of quality but one of range and fit for purpose.

Firstly range, if I want a 22 mm rear stabiliser bar for an R32 I can get quite a few brands, but if I want a 24 mm one, then it's Whiteline. Ditto the front, if I want a 24 mm front stabiliser bar for an R32 I can get quite a few brands, but if I want a 27 mm one, then it's Whiteline. If I want adjustable bars then it's Whiteline.

Fit for purpose, does it do the job that is was bought to do. I buy stabiliser bars to control the roll and fine tune the chassis balance. If a buy a 22 mm bar I expect to get a 22 mm bar, I expect to to fit on the car and not to break. To me the Whiteline bars do this. Now if I was a show and shine kinda guy, maybe the story would be different. Those shiny Japanese brand name bars sure do look smick, plus the name carries some cred.

So I reckon any extra cost is for looks and cred not functionality, if its looks you're after then you are probably prepared to pay the extra for the Japanese brands. If you are only chasing function then I see nothing wrong with Whiteline.

Regarding strut braces, there is a growing trend in Japan to link the brace back to the firewall. Sure this adds a modicum of extra strength, but you should see the damage after an accident! Noting that a firewall is a very structural member on a chassis and is very expensive to replace. I have seen a $2,000 accident covered by insurance, turn into a $10,000 accident not covered by insurance, by using a firewall mounted strut brace.

I can easily change the wheels back to standard for insurance purposes, but it is impossible to disguise a firewall mounted strut brace after the damage has occurred.

Hope that adds to the thread

is it any better to have 27mm front sway bars compared to the 24mm ones?? whiteline adj are set for 24-27mm adjustment rite?? im still waitin for those to arrive. was lookin on nengun and saw some cusco ones for 190...had second thoughts about the whitelines because of the cusco wow factor...then figured that hey theyre not even adjustable and i could easily buy 2 whiteline ones with change for the money it would costs to buy 2 cusco ones.

There is nothing at all wrong with aust. made products (whiteline) we lead the world in so many areas that we dont have to follow like sheep what japan and usa are doing!!!!Im on my second set of whiteline bars and they have transformed the way my 96 gts-t handles.

Regards,

SKYLINE (Kym)....

is it any better to have 27mm front sway bars compared to the 24mm ones??  whiteline adj are set for 24-27mm adjustment rite?? im still waitin for those to arrive.  was lookin on nengun and saw some cusco ones for 190...had second thoughts about the whitelines because of the cusco wow factor...then figured that hey theyre not even adjustable and i could easily buy 2 whiteline ones with change for the money it would costs to buy 2 cusco ones.

It's personal choice you perfer 24mm or 27mm. Some may find that 27mm at the front will oversteer too much, some may not.

With the adjustable ones you can tune the setup to your driving style. Fixed ones you have to adjust your driving style to the setup.

If your after wow factor, jap ones. If you want something to get the job done, Whiteline. I've used adjustable Whiteline sways on my old WRX and GTR. They did the job very well. Even wacked one on my dad's old Daewoo espero for laughs. Gave my mates Pulsar SSS a hard time through corners.

It's personal choice you prefer 24mm or 27mm. Some may find that 27mm at the front will oversteer too much, some may not.

Hi SA, slight correction there, larger front bar (27 mm compared to 24 mm) will result in less oversteer or more understeer, which ever way you want to describe it.

A larger rear bar (22 mm to 24 mm) will result in more oversteer or less understeer, which ever way you want to describe it.

You are right adjustable are great for getting the balance just right for your tastes. Problem is many people buy them and just whack'em on the hardest setting and never change them. In that case adjustables are a waste of money, they should have just bought the hardest ones in the first place.

Bottom line, if you really want to spend the time adjusting them, then buy them. If you just want to stick them on and forget about it, then save your money and buy fixed ones.

Hope that adds to the thread

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...