Jump to content
SAU Community

Recommended Posts

Ive done plenty of track work in my previous cars but zero with the GTR.

I currently have the Willal y-pipe/cat back + Willal tune.

Looking at an 18 or 19in wheel and tyre combo and rotors/pads.

Question is what size/offset wheels and tyre size suits and advice on rotors and pads.

Budget would be $8-10K for the lot.

I know I will go faster on slicks but would rather go with an "R" spec tyre (dont really want to smoke 4 x $800 slicks for one track day)

Will be doing recreational track days and the occasional supersprint

Kev

Edited by Speedah
Link to comment
https://www.sau.com.au/forums/topic/369213-its-time-to-track-my-gtr/
Share on other sites

I have a set of brand new ccw wheels in 18 inch with same offsets all round. Mounted on re55 rubber, new. Offsets allow wheel rotation. Perfect package except for me as I have widebody kit now and John from ccw screwed up my order. pm if interested.

As for rotors go for ap racing slotted and endless mx72 pads for street/track combo.

All up this type of setup is around 10k

If i was starting again with (with tracking a GTR) the first thing i would do is immediately get some used michelin 270/68/18" slicks and a set of enkie GTC-01 (18x10x22). The wheels are pretty cheap (about $2k a set) you can swap them front to back, and the 2nd hand race slicks are generally about $50ea. This tyre/wheel combo will literally transform the car and will easily be seconds faster that any street tyre. From there i would get some AP rotors and perhaps MX72's like mark says, they are a great street/track compromise pad. Combine that with a exhaust and tune, and you're going to be 95% as fast as you will ever go in the car (assuming you want to leave it a rego'd car).

Edited by LSX-438

If i was starting again with (with tracking a GTR) the first thing i would do is immediately get some used michelin 270/68/18" slicks and a set of enkie GTC-01 (18x10x22). The wheels are pretty cheap (about $2k a set) you can swap them front to back, and the 2nd hand race slicks are generally about $50ea. This tyre/wheel combo will literally transform the car and will easily be seconds faster that any street tyre. From there i would get some AP rotors and perhaps MX72's like mark says, they are a great street/track compromise pad. Combine that with a exhaust and tune, and you're going to be 95% as fast as you will ever go in the car (assuming you want to leave it a rego'd car).

Sounds good...where do you source the slicks from?

Does the stock suspension work Ok with slicks?

Sounds good...where do you source the slicks from?

Does the stock suspension work Ok with slicks?

Are you in Sydney? I might have some spare 2nd hand slicks.

Slicks work fine with stocker suspension.

However if you want hardcore suspension, i will be selling my JRZ's soon (putting stockers back in).

Are you in Sydney? I might have some spare 2nd hand slicks.

Slicks work fine with stocker suspension.

However if you want hardcore suspension, i will be selling my JRZ's soon (putting stockers back in).

Im in Wollongong

PM me your phone number and we can talk tomorrow

  • 4 weeks later...

Ok...thanks to the great advice from members of this forum I have sourced the following for my GTR

AP J Hook rotors (Front and rear)

Endless MX72 pads (front and rear)

Goodridge braided brake lines

Castrol SRF brake fluid

Enkie GTC-01 18 x 10 wheels

Project mu wheel nuts

some pre-loved Michelin S9 slicks

gtr16.JPG

rotors fitted

gtr20.JPG

you dont realise how big the rotors are until you have one in your hands

gtr21.JPG

Michelin S9 slicks and Enkie wheels

gtr28.jpg

going to Wakefield next week to get a feel for the car then to Eastern Creek on the 28th Aug for a Porsche Club super sprint..cant wait

Also looking at this...can anyone recommend a something similair

http://www.videovbox...w=article&id=49

Edited by Speedah
  • 2 weeks later...

Went to Wakefield today and did a best of 1.04.10

The traffic was very heavy (slow) in the "street car" class and a clean lap was almost impossible.

Really wanted a 1.03 but wasnt to be

For some reason the SD card in my Performance Box has zero data on it :-( __________________

Also looking at this...can anyone recommend a something similair

http://www.videovbox...w=article&id=49

I have the vbox lite in my r34. Its great in every way except the video is not HD! There are a few cheaper GPS camera setups with HD that you can do the graphics with - check the motorsport section, motorsport cameras thread.

Went to Wakefield today and did a best of 1.04.10

The traffic was very heavy (slow) in the "street car" class and a clean lap was almost impossible.

Really wanted a 1.03 but wasnt to be

For some reason the SD card in my Performance Box has zero data on it :-( __________________

Hey buddy did you see a White/Black R35 flash their lights to you on the road out of wakefield last weekend?

GTR.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...