Jump to content
SAU Community

Recommended Posts

Hey guys

Looking at getting a 3" metal core high flow cat to use in a new front pipe. Looked on Ebay and found the "BOKKA" and "KENOBI" 100 and 200 cpsi cats. They are pretty cheap going for under $200 delivered.

From what I can see most of the brands on Ebay appear to be the same cat from the same manufacturer, just badge with different names.

I know they more than likely arent ADR compliant and Euro emissions compliant like they say (not too worried about this) but I wanted to know if anyone has used them and what the quality is like. Im interested to know if the core has held together or started to fall apart.

Also are people going more for the 100 cpsi over the 200 cpsi? I found a flow test result from Cateran showing that a competitors 200 cpsi flows about 50 cfm less than their 100 cpsi. This would make the 200 cpsi a reasonable choice as it may help keep the exhaust slightly quieter.

Thanks guys

Edited by slippylotion

I bought the Bokka 100 cpsi one a little while ago. Was impressed by the quality, especially for the price. It remains to be seen if it lasts for 10 years or more...

I bought the Bokka 100 cpsi one a little while ago. Was impressed by the quality, especially for the price. It remains to be seen if it lasts for 10 years or more...

Does it have a fitting for the cat sensor at all?

Na there no good as they are a 400 cpsi ceramic core. Not much better than a factory cat.

3 inch inside and will pass EPA testing, might cost you 1 or 2 kW unless you are running big power

3 inch inside and will pass EPA testing, might cost you 1 or 2 kW unless you are running big power

At one stage I ran a 400 cpsi ceramic "high flow" 3" cat on my 180SX and it blocked up in 6 months. We couldnt work out why the car had lost a heap of power and couldnt hit high boost when it was on the dyno. Pulled out the cat to find it had half blocked. I wont run a ceramic core cat again after that.

Unbolt cat.. Smashed screw driver inside it... Bolt cat back up.. Hollow...

But I have a feeling Aus laws may not like this? In NZ as long as the cat is in place it's legal, they don't test emissions or if it's got its internals lol

Unbolt cat.. Smashed screw driver inside it... Bolt cat back up.. Hollow...

But I have a feeling Aus laws may not like this? In NZ as long as the cat is in place it's legal, they don't test emissions or if it's got its internals lol

I did this to the ceramic so called "high flow" cat in my 180SX and Hello power!

Edited by slippylotion

pretty sure it has to be above 200cpi to pass EPA. won't get hot enough otherwise, and the infra red thermometer won't detect a significant enough temp difference.

that being said, i'm so tempted to grab a decat pipe........ i've got a 3" catco, inspected it recently and it seemed fine - but hate knowing there is kw's getting eaten up in there.......that being said, it would not compare to how stupid i would feel if i got done by the cops/EPA for running an illegal cat setup - the fine alone would put me in debt for months.

pretty sure it has to be above 200cpi to pass EPA. won't get hot enough otherwise, and the infra red thermometer won't detect a significant enough temp difference.

that being said, i'm so tempted to grab a decat pipe........ i've got a 3" catco, inspected it recently and it seemed fine - but hate knowing there is kw's getting eaten up in there.......that being said, it would not compare to how stupid i would feel if i got done by the cops/EPA for running an illegal cat setup - the fine alone would put me in debt for months.

I hear you. Luckily it looks like I have a functioning cat in the 180SX and I rarely drive it these days also. I do have a bolt in Jap 200 cpsi cat for it but just too lazy to bolt it in. I like the extra power of a hollow cat but dont like the increased noise of the exhaust.

I dont want the M35 to be like this!

Unbolt cat.. Smashed screw driver inside it... Bolt cat back up.. Hollow...

But I have a feeling Aus laws may not like this? In NZ as long as the cat is in place it's legal, they don't test emissions or if it's got its internals lol

+1..... never had a cat in a car for more than 10,000k

Any of you guys running a turbo back exhaust finding the boost increases over standard due to the extra flow?

Yep. Andrew promised around 3 pound and a significant power gain. I got both.

Mind you thats my impression. Hasn't been on a dyno... yet...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...