Jump to content
SAU Community

Recommended Posts

Hey guys,

Thinking about painting the wheels myself. I've never done it before but I looked up some guides and vids on youtube thinking that I could do it.

Heres what I got so far, and correct me if theres any mistakes:

Requirements

1 or 2 Car Jacks

Painters Tape

Lots of Newspapers or those Card thingos

3 or 4 Sand Paper 150-320 grit (any recommendations?, different sources giving different numbers)

2 cans of Primer

2 to 4 cans of Engine/Wheel Paint (any recommendations?, I can only find Duplicolor Metalcast and 3m Engine Enamel Black Gloss or Black Matt, any of these good?)

2 cans of (Resistant?) Clear Coat

Process

1. Remove Wheel properly

2. Clean thoroughly well and Dry

3. Sand wheels and wipe off

4. Tape and cover Tyre

4. Spray with Primer and wait to dry

5. Sand Again ? ? ?

6. Spray with Wheel/Engine Paint and wait to dry

7. Repeat 6 three or four times. (Any recommendations? How many times?)

8. Spray with Clear Coat. (Do I repeat this step too? )

9. Wait 24 Hours before driving.

___________________________

I don't wanna spend a lot of money because I'm poor ! yes.gif

Is it cheaper to get a professional to powder coat it or something?

Before I do anything I got a question, will it look better if the wheels were painted black?

sam0503b.jpg

thanks.gif

Link to comment
https://www.sau.com.au/forums/topic/369543-black-rim-painting/
Share on other sites

first up......I think they will look real nice in black :)

im not very good at painting myself....but for the record....I have painted my dash...my boot....my engine bay....n one thing I can say is sanding is CRUCIAL..n makes ALL the difference !!

For the sandpaper, forget the 150 grit and replace it with 400. 150 is too course, I would only use it to remove a lot of material. When painting, all you are doing is roughing up the surface to give the paint something to grip on to. If the wheels are in relatively poor condition then start with some 240 just to get the imperfections out. You want to spray the 400 to get the best finish, so if the wheels are in good condition then just rough up the surface with the 400 until it loses it's 'shine' and takes on a matte appearance. Make sure you do a really good job of that. Then it's ready to spray.

As for the paint, make sure it is metal paint. Primer is probably unnecessary unless you sand all the way through to metal, you don't need to prime the old paint. Up to you though. But here's the thing: DO NOT LET THE PAINT DRY BETWEEN COATS. The reason for this is there are essentially two forms of paint bonding, physical and chemical. Physical is what you just achieved with the sanding. It is not as good as a chemical bond. If you let the paint dry, you will need to sand it again to make sure it bonds.

What you want to do is let the paint dry to the stage where it becomes sticky to touch but is not completely wet still. So spray the first coat, and then use the overspray on the newspaper to gauge how dry it is. Will probably take about 5 minutes to get to this stage. Then spray the next coat. I would do 5 base coats, and then move onto clear coat. Again, don't wait for the base coat to dry before spraying the clear. Do the same as above. I would do 3-4 coats of clear.

Good luck Eh :)

Dont paint them. I used VHT wheel paint which was meant to be chip resistant. It looked awesome for the first while then they started chipping. Its been a while and they haven't faded at all just the chipping is shit. Almost anything will chip the paint and cause damage to it. I prepped them up pretty well. Gonna sandblast them then have them powder coated.

  • 2 weeks later...

Go matte buddy.

Also a single can of autobarn wheel paint does 2x wheels.

Clean it up with acetone and spray away. I didn't mask mine either.

Pull the wheels off.

Newspaper on the ground.

Acetone the wheels very very well.

Wipe down again with clean rag.

Make sure can has been shaken very well.

First coat, very light. you should still see some of the original colour.

Do the same for the next wheel.

By the time you have done that, move back to the to other wheel and give it another spray.

Move back the to the second wheel, spray.

Wait 5-10mins.

Spray again, move to second wheel.

Wait 5-10mins.

You will get 4-6 coats out of the can.

The wheels will remain 'glossy' until they dry. Do not use the wheels for 24 hours.

Use a consistent sweeping motion, you should be fine.

Don't do it if it is cold outside.

2x $17.50 spray cans

1x $10 acetone

1x $10 Roll of rag

DSC_0808_.jpg

Thanks guys.

Finished painting the first wheel.. so far so good..

Unfortunately for me, I only have 1 jack.. and the spare tyre is deflated.

So 1 wheel at a time for me.

After the last coat, how long should I wait to put it back on the car to dry, so I can do the next wheel?

Of course I won't drive it. But I want to get it all wheels done asap before I have to drive again.

Or is it not a good idea?

Need advice fast !

Thanks thumbsup.gif

1st wheel holding the car now.

I asked my bro if I could borrow his spare tyre and it didn't fit !

So I just got his jack instead.. borrowed my mums jack too so that I could do the next 3! thumbsup.gif

The last 3 wheels are done and now waiting to dry!

post-81658-0-82889600-1310794565_thumb.jpg

Am I doing it right? Looks good to me.

Just waiting for it to dry for the matte black look I guess?

It took me a long time and lots of pain. Maybe not a long time, but constant PAIN!!!-ting. My hands are hurting bad. I'm so unfit !

It's been almost a day and the first wheel doesn't look matte black. I'm getting worried.

Is it normal?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...