Jump to content
SAU Community

Recommended Posts

  • Replies 164
  • Created
  • Last Reply

Top Posters In This Topic

What was the damage to the leather seats, will they fit r33 gtst s2. And how much postage to vic 3192. Cheers

Edited by ShiftyTys

Hey mate, ashamed you're wreck tis beautiful thing...it's a great example of what a clean and tough GTR ought to be like.

Mate, is your front bar still for sale? Plesae provide price for both twices. Cheers.

What was the damage to the leather seats, will they fit r33 gtst s2. And how much postage to vic 3192. Cheers

Just had some rub marks from getting in and out on the drivers side. Nothing that has actually torn or damaged the leather. Just discoloured. may come up with a intrusive clean.

Can do postage inclusive(free) to a local depot for you.

Matt

Hey mate, ashamed you're wreck tis beautiful thing...it's a great example of what a clean and tough GTR ought to be like.

Mate, is your front bar still for sale? Plesae provide price for both twices. Cheers.

Front bar is avail.

PM me what you are looking at

Just had some rub marks from getting in and out on the drivers side. Nothing that has actually torn or damaged the leather. Just discoloured. may come up with a intrusive clean.

Can do postage inclusive(free) to a local depot for you.

Matt

Also fits a gtst yeah? Thanks

Updated list

RB32(just under 3.2)$3500 Block with:

Custom ordered CP pistons(used, matched to bore)

Sonic tested and Cryo sleeved

Billet twin cam belt pulley adaptor

Stainless steel Welsh plugs

1.1mm head restrictor

Nisspeed 4WD sump Adaptor

Block milled for high HP Sump adaptor fittment

ARP head stud kit

Nisspeed oil pickup for extended Sump

RB26 Sump, extended with Baffles and Gates

Bore has been cross hatched for reinstall of pistons

Decked

6boost Twin turbo manifolds $1000

Heat wrapped and thermatec coated

come with Tomei metal shim gaskets and nut/washer kit

Intake hard Pipe kit $200

Modified to fit 6boost setup

Modified Power steering resevoir relocator for use with hard pipe kit $180

Custome bracket

direct bolt on with charcol canister

Apexi turbo inlet hard pipes $400

for Z32 AFM. comes with plugs and silicon

USED ROH 19" x 10" 3 peice Modena's $2500

Nangkang 275's

4" of dish all round

Shadow crome finish

NEW ROH 19" x 10" 3 peice Modena's $2700

NEW Nangkang 275's $800

4" of dish all round

Shadow crome finish

ROH 18" x 10" 3 peice Modena's $3000

Michelin 270 full slicks

3" of dish

Three layer pearl

Used for one day only

Michelin 270 full slicks x 16 $150 each

various levels of use

Custom exhaust $1000

75mm x 2 into 90mm into 127mm internal muffler

comes with 75mm x 2 Side pipes for track

New Vbands 75mm x 6 also thrown in(not fitted) but for quick change

Greddy Copy Plenum $500

with silicon 80mm-100mm adaptor

Nismo Plarque

Nismo Gmax Twin Plate clucth $1000

Nismo Flywheel

Pull type

50% life left

Can be repucked when the time comes by NPC for $400(both plates)

Nismo Gmax Twin Plate $900

Nismo Flywheel

Push Type

50% life

R33 GTR Series 3 Vspec gearbox $1000

with redline oil (70,000km)

R32 GTR Gearbox $800

may have short ratio's, will have to check

Normal oil

45,000km

with tranfer case

Field Boxer II linear Torque split controller $800

Known, best for track

Greddy Profec B boost controller $400

The Good one (3 knobs, no display)

Very very stable boost

Apexi Power FC $1100

with Commander

with Boost control kit

Innovate Motorsports LM2 OBD2 O2 Wideband $500

Stainless tail pipe sniffer

Ohlins Mines Esta Street Edition Suspension $1500

A comfortable ride was achieved at a high dimension with sport quality and balance while regular street driving by adopting the OHLINS shock absorber and the original springs.

In addition to the original specification, the shock absorber has a C ring height-adjustment function and the 20 steps of damping force-control. You can apply your favorite settings.

It gives you the decent driving experience which does not have the sense of incongruity as other types of cars by using the normal spring form and adopting variable rate spring for some types of cars.

This product has been developed and assembled by Mine's

Greddy Boost Gauge, Fuel Pressure $400

White face

Electronic with recall and alarm setting

includes Greddy A pillar pod for 33

Fuel system setup $400

twin 044

some speed flow fittings

BTR surge tank

relays

Carbon Fibre Full length cooling panel $250 $150

R33

Has some cracks around radiator bracket holes

Trust front lower lip $350

Series 3 N1 Bumper $550

N1 reo $250

Series 3 spoiler with boot $800

Front Guards with clear indicators $1000

Side Skirts $370

GTR 001 (GTR WON) Number plates forsale

SA

No Annual Fee

$500ono

RB30 Howards Ultimate forged connecting rods $1000

Guaranteed to 2000hp

The pinical of high hp rods

Piston Crown squirters

3000km's old

Perfect condition

Balanced by PM Engines

Provent 200 catch can $100

awesome item

Alloy radiator $180

R33 GTR shell

All R33 1998 GTR series 3 standard parts available aswell

Matt

Edited by BoostdR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...