Jump to content
SAU Community

Recommended Posts

On a different slant, do you think there's ever a placebo effect to think that just because a minor service is done, the car goes heaps better? :whistling:

One case in point was the lady who got her car back from the mechanic one afternoon.

Her car needed a minor service.

Then she gets a call from the owner of the service centre asking for her to bring the car in another day because his apprentice didn't get enough time to service her car.

She said, "...but I could have sworn the car went better!"

that could just mean the apprentice left out the air filter or played around with the tuning, something silly like that actually made the car go better but was possibly detrimental to its health/warranty which is why she was called back in

little things can make a big difference to someone in tune with their vehicle..After changing back to a lighter weight oil and getting a slight adjustment to the toe-in on my wifes car it almost feels like it did when we bought again..

before that she was starting to complain it was getting too old cause it didnt feel as responsive and was darting all over the road when it hit a bump..

Its no placebo its our senses telling us it is running better than it was, even if only so slightly..

I have plenty of friends that choose never to service and their cars just get worse and worse

On a different slant, do you think there's ever a placebo effect to think that just because a minor service is done, the car goes heaps better? :whistling:

One case in point was the lady who got her car back from the mechanic one afternoon.

Her car needed a minor service.

Then she gets a call from the owner of the service centre asking for her to bring the car in another day because his apprentice didn't get enough time to service her car.

She said, "...but I could have sworn the car went better!"

I hear what you're saying, a guy at work changes his plugs on his VK V8 every 1000kms because 'it runs heaps better'. I tell him he's dreaming...

I suspect that the biggest factor on my car was the pod filter, it was fairly black with 10,000ks worth of dirt (I actually thought K&N filters were red, turns out they're white and sprayed with red oil). Fresh plugs also results in a stronger spark, ie better burn and more power :)

160$ :woot: could of got a complete service for that with enough change for a 4pack of woodstocks and a packet of horizons..

$160 thats nothing my mum has a holden cruze diesel, her last service by a mobile holden mechanic was like $600--$700.

heres a silly little true story about not servicing your car..

old mate gets a brand spanking new 2005 model ute on lease arrangement, he has never had a new car or even a good car for that matter just keeps buying old bombs until this ute..

gets first service at 5000kms at mazda for warranty purposes .continues to drive the car then gets another service at 40,000kms at some backstreet mechanic.. continues to drive the car..

@ 110,000kms (just out of warranty of course) because of all his rubbish (empty ciggy packs etc) piled up on his dash doesn't see the oil light come on and pretty much runs it dry and all of a sudden clunk clunk clunk..suspected big end bearing..fills it with oil and continues to drive despite sounding like a tractor, drops it at mechanic who thinks he can fix it charges him 600$ to pull some stuff apart but cant find the problem..

however after filling it with some nice thick oil the noise quietens down to an acceptable level and he continues to drive it.

@ 180,000kms its running like absolute shit and wont start at times..i tell him to get it serviced..he replies with "it doesn't need servicing it just wont start" I give up arguing with him over it cause he doesn't want to listen..A week later he rings me stressed cause his car wont start and he has to go to work, I say whatever man get it serviced..he calls a mobile mechanic who comes out and puts new spark plugs in it for the Grand total of..

wait for it..

160$ :woot: could of got a complete service for that with enough change for a 4pack of woodstocks and a packet of horizons..

but this was a temporary fix..he then starts complaining that its using too much fuel, i tell him it probably needs a new air filter hes too dopey to do it so i take him to the servo and blow the dust out with a compressor, he is amazed by his new found response and extra 20km per tank fuel economy.. :laugh:

it rattled its way to about 200,000km before it was repossessed, the only thing that was ever changed on the car was the oil and filter about 3 times then continuos top ups after it went clunk a ,2 sets of spark plugs, 1 set of front brake pads, 2 s/h tyres and 2 old tyres I gave him

which is a pretty good effort really :no:

Ha! good story! wish i had a dollar for each time i have to explain to females that a service WILL NOT fix other problems that the car might have (eg leaking radiator)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...