Jump to content
SAU Community

Recommended Posts

hi guys, tax time is looming and im using my cash to shiny up my R32 gts-t, just wondering if anyone knows any reliable shops that do full window rubbers for front and rear windscreens and driver and passenger seals/dress strips,

any referals would be greatly apreciated.

Cheers,

Ralf "Mumslayer" Birkmann

Link to comment
https://www.sau.com.au/forums/topic/371039-r32-window-rubbersseals/
Share on other sites

We use 'Windscreens for Cars'

They can remove and refit the screens and they can source the aftermarket seals. I would definitely go Nissan genuine for seals though as the aftermarket ones never do the job properly.

Also expect to have the front screen smashed when if it's removed. I suppose it all depends on whether you even need to remove them or if you're just replacing the very outer

how patient are you? it takes a LOT of time to cut the thing out and clean the channel. the back has a bit more 'give' in it when you release it. the front will break if you pull too hard. it is hard to explain unless you do it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
    • Yes, well. Mine are less than half that. ARBs are not set to "dumb" either.
    • I would hope. But, we all know even the best companies have an issue sporadically.
×
×
  • Create New...