Jump to content
SAU Community

Recommended Posts

IIRC, as it was quite some time ago.. when I had stock brakes I had to run a 3mm spacer or the 34GTT rims bound up on the calipers. Problem was alleviated when going to 33gtst brakes as the caliper sat away from the little dippy bit inbetween each of the 34GTT spokes.. good luck!

Not 100% sure, but I believe so yes. Fairly sure they look like this:

post-3692-1124260416.jpg

But I've seen so many types of calipers and never paid that much attention to his lol, not sure if I have them mistaken. They are stock as far as he knows.

Reminds me of sick brake/wheel fitment I had on the Ceffy when it had R32 brakes but still 4 stud at the front with S13 stockies.

THIS ACTUALLY DID CLEAR THE BRAKES.

Don't ask me how, even with my own 2 eyes I couldn't see any actual gap but the wheel did spin.

http://a1.sphotos.ak...81_652349_n.jpg

It scraped a few times until I did up all the wheel nuts properly, then just cleared.....I should've kept it like that and racked up some more points for being a mad c**t.

Edited by Nic_A31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...