Will R34 Gtt Rims Fit On A R32 Gtst?

[the new kid]

Will R34 Gtt rims fit on a R32 gtst, or will i need to buy spacers?

Thanks (:

[10 4]

yes, no spacers

[the new kid]

cheers mate

[erik]

they will. goodlooking & cheap upgrade too

[erik]

they will. good looking & cheap upgrade too

[bubba]

IIRC, as it was quite some time ago.. when I had stock brakes I had to run a 3mm spacer or the 34GTT rims bound up on the calipers. Problem was alleviated when going to 33gtst brakes as the caliper sat away from the little dippy bit inbetween each of the 34GTT spokes.. good luck!

[Hanaldo]

Nah they dont need any spacers. Mate just put some on his 32 GTST.

[-Jimmy-]

I needed spacers...

[bubba]

Nah they dont need any spacers. Mate just put some on his 32 GTST.

What brakes?

[Hanaldo]

Stock GTST brakes. Interesting.

[bubba]

Do they have the embossed NISSAN logo?

[Hanaldo]

Not 100% sure, but I believe so yes. Fairly sure they look like this:

But I've seen so many types of calipers and never paid that much attention to his lol, not sure if I have them mistaken. They are stock as far as he knows.

[bubba]

Mine bound up on the NISSAN logo, there are some calipers that don't have the big embossed NISSAN so that could be the case. Only happened with the 280mm brakes..

[Nic_A31]

Reminds me of sick brake/wheel fitment I had on the Ceffy when it had R32 brakes but still 4 stud at the front with S13 stockies.

THIS ACTUALLY DID CLEAR THE BRAKES.

Don't ask me how, even with my own 2 eyes I couldn't see any actual gap but the wheel did spin.

http://a1.sphotos.ak...81_652349_n.jpg

It scraped a few times until I did up all the wheel nuts properly, then just cleared.....I should've kept it like that and racked up some more points for being a mad c**t.

Edited July 17, 2011 by Nic_A31

[dirtyRS4]

http://www.skylinesaustralia.com/forums/topic/169774-r34-gtt-rims-wont-fit-r32/

[10 4]

Wow =/

[bubba]

Yeah.. don't listen to what Bubba says.. he has hasn't had his 32 for very long and knows nothing about them

[GTS-t VSPEC]

don't listen to what Bubba says..

That's the bit I'm taking away from this thread

[bubba]

If that's all you take away from this, my job here is done

[the new kid]

Thanks guys (: