Jump to content
SAU Community

Will R34 Gtt Rims Fit On A R32 Gtst?

the new kid

By the new kid,
in Western Australia

 Share

Recommended Posts

bubba Grand Master

bubba

Posted
Posted

IIRC, as it was quite some time ago.. when I had stock brakes I had to run a 3mm spacer or the 34GTT rims bound up on the calipers. Problem was alleviated when going to 33gtst brakes as the caliper sat away from the little dippy bit inbetween each of the 34GTT spokes.. good luck!

Hanaldo Grand Master

Hanaldo

Posted
Posted

Not 100% sure, but I believe so yes. Fairly sure they look like this:

post-3692-1124260416.jpg

But I've seen so many types of calipers and never paid that much attention to his lol, not sure if I have them mistaken. They are stock as far as he knows.

Nic_A31 Grand Master

Nic_A31

Posted
Posted (edited)

Reminds me of sick brake/wheel fitment I had on the Ceffy when it had R32 brakes but still 4 stud at the front with S13 stockies.

THIS ACTUALLY DID CLEAR THE BRAKES.

Don't ask me how, even with my own 2 eyes I couldn't see any actual gap but the wheel did spin.

http://a1.sphotos.ak...81_652349_n.jpg

It scraped a few times until I did up all the wheel nuts properly, then just cleared.....I should've kept it like that and racked up some more points for being a mad c**t.

Edited by Nic_A31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Bennym35
      New guy

      By Bennym35 · Posted

      Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • Songo
      New kid on the block

      By Songo · Posted

      thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • Duncan
      Im Back baby!

      By Duncan · Posted

      wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...