Jump to content
SAU Community

Recommended Posts

I'm also interested in this.

I might even get a copy of the nistune software and have a look at what features the nistune gives the R34 ECU that are tunable.

oh, and I'm a tuner mate - and I only deal with good shit. Sick of tuners only pushing haltech or some crap because that is all they know. I've seen fools cut a Ford XR6T factory ECU out and "wire in" a haltech because they had no idea how to edit a factory ECU, and we all know the XR6T ECU is by far the best ECU for it.

Its what is the most functional for the user \ car owner.

AFAIK you can't NIStune a 33 or 34 GTR ECU.

Type 2 boards cover the following earlier consult vehicles:

M30 Infiniti (VG30DE)

ECR32 Skyline (RB25DE)

ECR33 Skyline (RB25DET)*1

HCR32 Skyline (RB20DET)

BNR32 Skyline (RB26DETT)*2*3

Q45 Infiniti (VH45DE)*4

U12 Bluebird (KA24E)

Y60 Patrol (TB42E)

Z32 Fairlady 300ZX (VG30DETT)

*1 ECR33 RB25DET Skyline can use HCR32DET ECU (no VCT) or Z32 VG30DETT ECU (internal modifications required)

*2 BNCR33 Skyline requires BNR32 RB26DETT ECU and O2 sensors

*3 BNCR34 Skyline requires BNR32 RB26DETT ECU, O2 sensors and CAS wiring modifications

*4 Q45 VH45DE (1990-1992) using removed high gear maps

So everything a 32R NIStune can do.

hhhmm.

I wonder if they are much different software wise, other than the R34 ECU being modified to take to the newer o2 sensors and the CAS wiring.

I definitely wouldn't want to hack up a R34 GTR wiring loom, so I would buy a second hand R32 GTR ecu and internally mod it for the CAS. Its not hard, I made a R32 GTR powerFC work fine in a R32 GTS-T.

You do have to run the r32 GTR ecu but it seems that it plugs straight in and the only mods being the CAS and o2 sensors.

The pins in the 34 cas plug only need swapping around to make it run with the 32 ecu.

As for the o2 sensors, read the attached. Im assuming the 33 o2 sensors would be the same as the 34's.

R32 GTR ECU on R33 GTR.pdf

NIStuning a 33GTR is the same as 34GTR except 34GTR needs the CAS wiring changes.

As for the MFD, I guess it would be a matter of figuring out what signals it needs from the ECU and ensuring it continued to get those signals (pinout for each ECU and one for the MFD and some head/nut scratching) at the correct voltages etc.

  • 2 weeks later...

If plugging in a BNR32 ECU into a BNR34 do we just need to swap over the 1 degree and 60 degree CAS wires to use this particular ECU? Is that all is required in addition to internally modifying the ECU. If so this is good and I just need to update my documentation to suit for people that want to use Nistune on a BNR34

When I meant about Nissan swapping the CAS lines over between models for example S15 ADM and S15 JDM have their CAS wires swapped over on the same two pins. This may be because of having NATS in ADM model

Hmm interesting..

I was just working off your documentation Matt, I haven't done a 34GTR yet.

Pretty much all the NIStune installs I have done are Type-4 boards in either 34GTT's or s2 Stageas.

Type-2 board is in my 32gtst's ECU and I will be kicking that in the guts next week.

  • 2 years later...

So are there any firm instructions on how to get the BNR32 ECU to work in a BNR34? Ie, all wiring mods needed?

I have one here ready to be nistuned but don't know for sure what needs to be done. I have only seen instructions for the BNR33.

  • 6 months later...
okay, all done. I have a nistuned R32GTR ECU running my R34 GTR. I have spoken to Matt from Nistune for some help and regarding what was needed to be done. The car runs absolutely perfect with the R32 GTR ECU.


Compared to the powerfc:


- Starts faster

- comes to idle so much quicker

- idle is heaps more stable

- car just generally runs better


After tuning the rest of the map, it runs really well.


Regarding how I did it, It is a little more than just swapping cas wires -


Differences between wiring:


Pin 8 - Ignition switch (IGN) (R34) / Pin 45 - Not used (R34)

=> Wire pin 8 to Pin 45 (R32 ECU)


Pin 10/20 - Not used (R34)

=> Pin normally for Ignition GND (R32 ECU)

Wire 10/20 to pin 50/60 to provide the R32 ECU with an ignition ground reference. After this R32 ECU will work fine in R34 ECU after speaking to Jono today and getting it working


Pin 31 - Not used (R34)

=> Wire needed to be added for consult CLK signal (R32 ECU)


Pin 41 - Camshaft position 1 deg POS (R34) / Pin 51 not used (R34)

=> Swap to 42/52 on CAS 1 deg POS (R32 ECU)


Pin 42/52 - Camshaft position 120 deg REF (R34)

=> Swap to 41/51 on CAS 120 deg REF (R32 ECU)


Pin 54 - IMMU/NATS (R34) - Don't worry about this

=> Not used (R32 ECU)


Pin 115. Heated O2 sensor control signal

=> This pin not used (R32 ECU) so wire to be connected to pin 50 (control unit ground) on R32 ECU

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...