Jump to content
SAU Community

Recommended Posts

if you have a power just monitor injduty and TPS

replacate

replacate with gate wired open

i would be gobsmacked if duty was less @ the same TPS with gate wired open

the physics do not support it

about 10 years ago a friend did this. I think he had a turbo starion at the time. He poped the clip off the actuator/flap

and noticed better economy. From memory the car was basically standard. It wasnt just a little bit of economy, it was

pretty significant. He drove it around like that for atleast 6 months.

It got me interested so I did the same to my car at the time. Quite funny driving around. Nearly like NA but it will

still pull really low boost up top. You can also hear the turbo trying to spool driving around but no boost. I noticed

better economy too but got jack of it and didnt last a week till the clip found its way back on.

regarding your switch/circuit. There are water injection parts that people sell off the shelf that when the systems

pressure switch detects a clog it will N/O or N/C to a safty trigger (solenoid) linked to your wastegate control to run wastegate

pressure. They also use it for low level saftey

imo go for it, wont be hard or time consuming to knock up. you will notice better economy but it might drive like shit.

The earlier your system produces boost the more fuel to be saved but also has the biggest impact on driveability

You would really need a tune to make use of it.

What everyone has been trying to tell you is that compression ratios, combustions chambers, cam profiles and ECU maps have all been set up for a TURBO. The best compromise you could get would be to run an ECU with dual map functions and actually TUNE the thing for no boost.

Thanks for everyones input...

I had a look this afternoon and ive got the components on the shelf at work so it wont really cost me a cent to try... I understand about the compression ratios, cams, ECU maps ect being set up for a factory turbo setting. I guess ill give it a crack and see how it goes over full tank of city driving and the best thing will be if you want to give the car a boot here or there it would simply be the flick of a switch and up goes the boost...

Cheers

A better approach to better fuel economy would be to buy a wideband O2 sensor that can output a narrowband signal, wire it in place of the standard O2. Get a NIStune and run O2 feedback across the whole map.

I will say however, if this is for your Stagea, it will be the biggest pig ever.. without VCT to help bring my laggy highflow on boost the heavy assed wagon was absolutely terrible to drive around town. Terrible.

And my fuel economy wasn't better at all. It was much worse because the engine was labouring trying to haul the wagon around when it really needed a bit of boost to help.

Or.. buy a 4cyl N/A daily.

so so many negative people! try it and see and report back your results, its better to do that than give these cocks the chance to spout off, in the real world they would just get a punch in the mouth and be on their way but this is the internet and the cock is free to shxit on everyone, I believe the idea is at least worth trying, best of luck with it!

I don't see the point in messing around and making your car go like a slug just to save a few penny's. It's already been said but i'll say it again... control your right foot better, that also goes with things like how you use your gears and how you decelerate.

Controlling how you bring on power with your right foot along with short shifting and letting the engine over run on deceleration are a sure fire way to save a good amount of fuel and not have to screw around and deal with a sluggish car.

If you're that desperate for fuel economy the word "hatchback" comes to mind.

The money saved on fuel (if web possible) set up like this, you will waste constantly changing plugs from being fouled, you'll also waste money on getting the soot cleaned from the rear bar. Not to mention since the car will be a slug, you'll be using more throttle to get going etc.

In the end, I will be a big useless waste if money. And, you bought a car that is powerful, to make it not powerful.

It's like calling a hooker over, to not have sex with her.

Tell Me, why didn't you just buy a toyota prius?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
×
×
  • Create New...