Jump to content
SAU Community

Recommended Posts

Had my 34 on the dyno at SST today in Perth (tuning courtesy of maestro Ant), fitted a Power FC and got 287 RWKW = 385 RWHP with

* stock engine

stock Fuel system

stock Turbos

* 1.1 bar Boost

* Power FC

* full Blitz exhaust

* pod air filters

* Trust Intercooler

* No other mods

The power curve is Bullshit, like out of a text book heaps of Torque (Steve can you post dyno graph into this thread?).

Injectors read (on 34TV screen) 98.4% of max !!! So an upgrade of fuel system is around the corner as is New Tyres and twin plate clutch (still standard at the moment).

If you are in Perth and want your car tuned go and see Ant or Steve at SST's, if you can get in to see them it will be well worth your time and money. If anyone can post the chart send me your email address and I will foward it to you to post.

Jeremy

Congrate on the 287rwkw..

Any Dyno graph?

That's very interesting result,consider most people have the similar mods only get about 210~220 rwkw..

******************

stock engine

stock fuel system

stock turbo @ 1.1 bar

Power FC

full Blitz exhaust

pod air filters

Trust Intercooler

No other mods

******************

I did do a search, you seems the only one could get that power out of stock turbo, don't get me wrong, I just try to figure out what did my mechanic went wrong on my mods while I still have my stock turbo

One of forum member has 2835ProS only get about 280rwkw....

thats a good powerfigure for 1.1bar of boost.. but dont forget you have a PFC .. so it sounds about right but still at the top :( ..

atm i have my R34 GT-R with some mods.. you must uprade the fuel system on a GTR after its been modifed.

planning on 330kw at wheels

PFC Pro

HKS Intercooler

Cam Gears - HKS ADjustable

HKS Priest Exhaust : The whole damn way :D

Trust Air Filters

1.3Bar

Nismo Injectors 660HP ?

Nismo Fuel Pump 600-700HP ?

Twin plate clutch HKS .

i had 291KW with the same setup on yours.. with 1.11bar ;)

R33/R34 GT-Rs are so easy to get power out of with standard parts.

Jeremy, That's a very nice car you have there, and I loved the flames that you were shooting out on the dyno. Get the twin-plate in and bring it to Drag Combat, can't wait to see what the stock turbs can do the 1/4 in:D

Jeremy, Your not trying hard enough, lend me the car and you can follow behind to see if the flames come out;)

Yes it was done in shootout mode, and if Jezzrrr get's the graph up then all the details will be on the chart.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...