Jump to content
SAU Community

Recommended Posts

Since BP Ultimate is not anywhere convenient for me, I use Mobil 8000. when I was running at the limit with a stock intercooler I found I needed to turn boost down on Optimax or pinging would occur.

Don't have an opinion on BP yet.

This could all be urban myth but a little while ago I heard someone say that 98RON is going to be wound back to 96RON and even 95RON so i started asking everytime i'd put fuel in at Shell or BP or Mobil id ask at the counter what octane it was and for all the fuels i was told it's 96RON apparently the CALTEX refinery where it all comes from they stopped running 98RON

btw This is in sydney im talking about could be diff in other states.

This could all be urban myth but a little while ago I heard someone say that 98RON is going to be wound back to 96RON and even 95RON so i started asking everytime i'd put fuel in at Shell or BP or Mobil id ask at the counter what octane it was and for all the fuels i was told it's 96RON apparently the CALTEX refinery where it all comes from they stopped running 98RON  

btw This is in sydney im talking about could be diff in other states.

BP ultimate and Optimax are 98 RON whereas other normal premium is 96 RON. About to check out MOBIL. So don't use Caltex Premium 96 ron which I have done once in the past.

BP ultimate and Optimax are 98 RON whereas other normal premium is 96 RON. About to check out MOBIL. So don't use Caltex Premium 96 ron which I have done once in the past.

I was talking about the ultimate and optimax not the regulare premium stuff.

From what i've heard they havew gone down/.

Hrmm.. have been told to stick with ultimate, reason includes optimax has been known to cause issues like pinging.. and that ultimate seems to be better for turbos and produce more consistence engine running output... and that is what I have only used since I had the car..

Tho a old but knowledgable dude at work (which drives a porshe 928) told me tat is bs and that all the brands buy fuel from each other.

So I duno wat to think.. tho I'm tempted to run a full tank of optimax to see what effect I will get.. Only after my next major service/tune.. another 2000k away. :P

I was using BP Ultimate but now run Optimax mainly due to the 4cent/litre coles discount and I pass a servo on the way to work that always has about the best price around (even before the 4cents off).

Couldn't really say that I notice any difference between the two fuels through the "seat of the pants" dyno.

The BP seems to run a bit cleaner. But that is just judging from the smell of the exhaust.

Starting using Optimax but now only use Ultimate cos I read somewhere, not sure whether it was this forum or another one, that Optimax is only 95, and they put some sort of additives in it to bring it up to 98...

Knowing my luck it is probably an urban myth, but must admit I get better mileage and performance outta the Ultimate....

BTW - lots of people here in Canberra call Optimax 'Crappymax'

:-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...