Jump to content
SAU Community

Recommended Posts

Since BP Ultimate is not anywhere convenient for me, I use Mobil 8000. when I was running at the limit with a stock intercooler I found I needed to turn boost down on Optimax or pinging would occur.

Don't have an opinion on BP yet.

This could all be urban myth but a little while ago I heard someone say that 98RON is going to be wound back to 96RON and even 95RON so i started asking everytime i'd put fuel in at Shell or BP or Mobil id ask at the counter what octane it was and for all the fuels i was told it's 96RON apparently the CALTEX refinery where it all comes from they stopped running 98RON

btw This is in sydney im talking about could be diff in other states.

This could all be urban myth but a little while ago I heard someone say that 98RON is going to be wound back to 96RON and even 95RON so i started asking everytime i'd put fuel in at Shell or BP or Mobil id ask at the counter what octane it was and for all the fuels i was told it's 96RON apparently the CALTEX refinery where it all comes from they stopped running 98RON  

btw This is in sydney im talking about could be diff in other states.

BP ultimate and Optimax are 98 RON whereas other normal premium is 96 RON. About to check out MOBIL. So don't use Caltex Premium 96 ron which I have done once in the past.

BP ultimate and Optimax are 98 RON whereas other normal premium is 96 RON. About to check out MOBIL. So don't use Caltex Premium 96 ron which I have done once in the past.

I was talking about the ultimate and optimax not the regulare premium stuff.

From what i've heard they havew gone down/.

Hrmm.. have been told to stick with ultimate, reason includes optimax has been known to cause issues like pinging.. and that ultimate seems to be better for turbos and produce more consistence engine running output... and that is what I have only used since I had the car..

Tho a old but knowledgable dude at work (which drives a porshe 928) told me tat is bs and that all the brands buy fuel from each other.

So I duno wat to think.. tho I'm tempted to run a full tank of optimax to see what effect I will get.. Only after my next major service/tune.. another 2000k away. :P

I was using BP Ultimate but now run Optimax mainly due to the 4cent/litre coles discount and I pass a servo on the way to work that always has about the best price around (even before the 4cents off).

Couldn't really say that I notice any difference between the two fuels through the "seat of the pants" dyno.

The BP seems to run a bit cleaner. But that is just judging from the smell of the exhaust.

Starting using Optimax but now only use Ultimate cos I read somewhere, not sure whether it was this forum or another one, that Optimax is only 95, and they put some sort of additives in it to bring it up to 98...

Knowing my luck it is probably an urban myth, but must admit I get better mileage and performance outta the Ultimate....

BTW - lots of people here in Canberra call Optimax 'Crappymax'

:-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...