Jump to content
SAU Community

Recommended Posts

Post a reply, don't do a quick reply. Look for the "Additional Options" box and click on the "manage attachments" button. Should be able to browse for the pic on your computer and then click ok. The pic will be attached to the post.

hope that helps, cheers.

Hey Munna,

I bought my R32 with the same setup, standard recirculating BOV and an atmo BOV (non-adjustable HKS Super BOV on mine) in the same place as yours. The reason people set it up this way is because they want to run an atmo BOV for some reason (high boost application or they just like the sound), but also want the car to retain idle quality and not to run mega rich between gear changes because the standard BOV will still work to a certain degree. (The cars ECU expects a certain amount of air to be recirculated by the std BOV at these points).

Didn't really hamper performance of the car, but it did hamper performance of the HKS BOV as it hardly even went off most of the time!

So it really seemed like a pointless setup, I ended up removing it for that reason.

Yeah I had the same thing - on 16psi the HKS would work alot harder.

As far as limits of the std BOV - from what I've heard it's pretty variable....I thought mine was leaking at 12psi but have since discovered it isn't. I've heard they hold up to 17psi standard, but can't confirm it, some say more, some say less...

There's a thread on SAU that describes a modification you can do to the BOV to make it hold a bit more boost at the cost of causing it open up a little slower:

http://www.skylinesaustralia.com/forums/sh...read.php?t=9634

.....Additionally, the Americans seem to love our std Skyline BOV as well - it's a Mitsubishi design and comes on a few models they have over there, a few things they've done to make them hold more boost:

Crush it in a vice!

http://www.geocities.com/MotorCity/Garage/...4/crushBOV.html

Physically drill out the small air leak inside the bov and vent it to the atmosphere for slow openning and holds boost up to 30psi, not bad!!

http://www.thedodgegarage.com/turbo_bov_mod.html

Hey CerealKiller,

Yeah, tightening it up so far that it can't open will definitely nullify it!! Of course if you have a pod filter the std bov is quite loud too.....

A friend and I tried this on his DR30 Skyline which has a adjustable Sheepdog BOV, we were able to prevent it from openning at all, such was the extent of the adjustment. Not necessarily good for the turbo (it has no std bov)....but so much quieter, b4 it sounded like a steam train venting every time it went off!

Personally on my car I just went to a jap wrecker and got a piece of intake piping without the mount/hole for an atmo BOV and then sold the BOV!

Yeah I had the same thing - on 16psi the HKS would work

RaseR

RaseR Blocked the little hole off on the standard blow off valve as in the the posts you listed and I could hardly beleive how much faster the turbo spolled up. Heaps more responive now and atmo blow off valve is louder.

Hey Munna, great result!

I had limited success with the BOV mod (I tried it after removing my atmo bov), seemed to hold boost a little better and opened up later - but I ended up reverting back because on my car it also caused infrequent part throttle surging. So many people have had totally different results from doing this mod.....it's interesting, I wouldn't mind trying the 'Dodge Garage' BOV mod as described in the third article I posted earlier, but haven't had the inclination as yet!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...